Start and Stop Accelerator Plus

The command wxmgr is identical to ncmgr.

To understand the details, refer to Start and Stop ncmgr

Start Accelerator Plus at System Boot Time on Linux

This step is optional.

The instructions in this section are valid for Linux.
Note: This part of the installation requires root permission.

The Accelerator Plus vovserver can be restarted at reboot by installing the proper script in both the /etc/rc3.d and /etc/rc5.d directories for Linux.

Run the following commands on the host that was selected as the Accelerator Plus vovserver.
% /bin/su -
% cp $VOVDIR/etc/boot/S99wx /etc/rc3.d/S99wx
% chmod 755 /etc/rc3.d/S99wx
% vi /etc/rc3.d/S99wx
Edit configurable items as needed.
Note: sudo should be used where configured. To avoid Trojan Horse programs, su should always be called using the full path /bin/su on Linux.
You can test with:
% ./S99wx start
% ./S99wx stop
Note: Re-start the Accelerator Plus server with the command ./S99wx start after testing the stop capability.