Remove an Emulator Tasker

If it is necessary to remove an emulator tasker, the following steps should be taken:

  1. Stop the tasker.
  2. Edit the emulator configuration and remove the tasker from the appropriate RTHOSTS entry.
  3. Run the vovemulmgr config command.
  4. Run the vovemulmgr config check command as a check.
    For example, to stop the tasker running on host zbrt15, the following commands could be used:
    nc cmd vovtaskermgr stop RT_zbrt15  
    vi <swd>/config/hero/emul.cfg  
    nc cmd vovemulmgr config  
    nc cmd vovemulmgr check