Viewing the Far Field Results (2D)
View the far field results on a polar graph.
Note: Since a full 3D set of data was requested for this example, 2D cuts can be
extracted.
-
Create a new polar graph.
-
On the Home tab, in the
Create new display group, click the
Polar icon.
-
On the Home tab, in the
Create new display group, click the
-
Add the far field result to the polar graph.
-
On the Home tab, in the Add results group, click the
Far Field Source icon. From the drop-down list, select FarField1.
-
On the Home tab, in the Add results group, click the
-
View the far field gain plotted in the YZ plane.
-
On the result palette, in the Slice panel, make the following changes:
- From the Independent axis (Angular) drop-down list, select Theta (wrapped).
- From the Frequency drop-down list, select 1.645 GHz.
- From the Phi drop-down list, select 90 deg (wrapped).
-
On the result palette, in the Slice panel, make the following changes:
-
On the result palette, in quantity panel panel, select the dB check box.
Figure 1. The far field results on a polar graph.