Splitting a Geometry Part at a Specified Plane

Apply the split operation at a specified plane to divide a geometry part.

  1. Select the geometry part that you want to split.
  2. On the Construct tab, in the Modify group, click the  Split icon.


    Figure 1. The Split dialog.
  3. Under Origin, specify the position of the plane to split the geometry.
  4. Under Plane, select one of the following:
    • UV
    • UN
    • VN
  5. Under Rotate split plane, specify the angle of rotation around the plane selected in Step 4.
  6. Click Create to split the geometry and to close the dialog.