# Finite Conductivity

Finite conductivity data consists of the material parameters and associated data such as skin effect penetration depth, conductor impedance as well as the power losses per label.

The block with the set of characteristics for the single labels is displayed first as follows:
                           DATA FOR LABELS

Label Cuboid1.Face3:
Metallic conductor (skin effect)
Surface thickness:  5.00000E-03 m
Sigma =   1.000E+02 S/m   Mue_r =   1.000E+00   tan(delta_mue) =   0.000E+00
Penetration depth of the skin effect:  5.81365E-03 m
Conductor impedance due to the skin effect: (  2.098E+00 +j   9.799E-01) Ohm
After the calculation of the currents the losses that result from finite conductivity are displayed as follows:
                              POWER LOSS METAL (in Watt)

Results for labels     |                 in the segments                  | in the
Cuboid1.Face3 | 0.0000E+00  0.0000E+00  0.0000E+00   0.0000E+00  | 8.9357E-06
Cuboid1.Face4 | 0.0000E+00  0.0000E+00  0.0000E+00   0.0000E+00  | 1.2433E-06
Cuboid1.Face1 | 0.0000E+00  0.0000E+00  0.0000E+00   0.0000E+00  | 1.4940E-06
Cuboid1.Face6 | 0.0000E+00  0.0000E+00  0.0000E+00   0.0000E+00  | 4.0082E-07
Cuboid1.Face2 | 0.0000E+00  0.0000E+00  0.0000E+00   0.0000E+00  | 1.2433E-06
Cuboid1.Face5 | 0.0000E+00  0.0000E+00  0.0000E+00   0.0000E+00  | 1.4940E-06
Sum:                 | 0.0000E+00  0.0000E+00  0.0000E+00   0.0000E+00  | 1.4811E-05

Total loss in segments:                     0.0000E+00 W
Total loss in triangles:                    1.4811E-05 W

Sum of losses in metallic elements:         1.4811E-05 W

SUMMARY OF LOSSES

Metallic elements:                          1.4811E-05 W
Dielectric:                                 0.0000E+00 W
Mismatch at feed:                           0.0000E+00 W
(based on a total active power:             5.2196E-03 W)