block Multiplex2 "Multiplexer block for two input connectors"
extends Modelica.Blocks.Icons.Block;
parameter Integer n1 = 1 "Dimension of input signal connector 1";
parameter Integer n2 = 1 "Dimension of input signal connector 2";
Modelica.Blocks.Interfaces.RealInput u1[n1] "Connector of Real input signals 1"
annotation (Placement(transformation(extent = {
{-140, 40},
{-100, 80}})));
Modelica.Blocks.Interfaces.RealInput u2[n2] "Connector of Real input signals 2"
annotation (Placement(transformation(extent = {
{-140, -80},
{-100, -40}})));
Modelica.Blocks.Interfaces.RealOutput y[n1 + n2] "Connector of Real output signals"
annotation (Placement(transformation(extent = {
{100, -10},
{120, 10}})));
equation
[y] = [u1; u2];
annotation (
Documentation(info = "<html>\n<p>\nThe output connector is the <strong>concatenation</strong> of the two input connectors.\nNote, that the dimensions of the input connector signals have to be\nexplicitly defined via parameters n1 and n2.\n</p>\n</html>"),
Icon(
coordinateSystem(
preserveAspectRatio = true,
extent = {
{-100, -100},
{100, 100}}),
graphics = {
Line(
points = {
{8, 0},
{102, 0}},
color = {0, 0, 127}),
Ellipse(
extent = {
{-15, 15},
{15, -15}},
fillColor = {0, 0, 127},
fillPattern = FillPattern.Solid,
lineColor = {0, 0, 127}),
Line(
points = {
{-100, 60},
{-60, 60},
{0, 0}},
color = {0, 0, 127}),
Line(
points = {
{-100, -60},
{-60, -60},
{0, 0}},
color = {0, 0, 127})}),
Diagram(
coordinateSystem(
preserveAspectRatio = true,
extent = {
{-100, -100},
{100, 100}}),
graphics = {
Line(
points = {
{-100, 60},
{-60, 60},
{0, 0}},
color = {0, 0, 127}),
Line(
points = {
{-100, -60},
{-60, -60},
{0, 0}},
color = {0, 0, 127}),
Line(
points = {
{8, 0},
{102, 0}},
color = {0, 0, 127}),
Ellipse(
extent = {
{-15, 15},
{15, -15}},
fillColor = {0, 0, 127},
fillPattern = FillPattern.Solid,
lineColor = {0, 0, 127})}));
end Multiplex2;