Accumulator

This block implements an accumulator with the option to reset the state.

Accumulator

Library

Dynamical

Description

This block implements an accumulator with the option to reset the state. The block can be configured with or without direct feedthrough. If direct feedthrough is selected, the current value of the accumulator is copied on the output synchronously when the block is activated. Otherwise, the previous value is copied. When the clk port is activated, dX is added to the internal state. When the reset port is activated, the internal state is set to X0. If both the reset and the clock are activated, priority can be given to one or the other through the last parameter.

Parameters

Accumulator_0

Name	Label	Description	Data Type	Valid Values
x0	Initial value	Initial value of the accumulator.	Matrix
feed	Feedthrough	If direct feedthrough is selected, the current value of the accumulator is copied on the output synchronously when the block is activated. Otherwise, the previous value is copied.	Number	0 1
reset_priority	Reset has priority over clock.	If the block is activated through both ports synchronously, choose reset over clock.	Number	0 1

Name

Label

Description

Data Type

Valid Values

Initial value

Initial value of the accumulator.

Matrix

feed

Feedthrough

If direct feedthrough is selected, the current value of the accumulator is copied on the output synchronously when the block is activated. Otherwise, the previous value is copied.

Number

0
1

reset_priority

Reset has priority over clock.

If the block is activated through both ports synchronously, choose reset over clock.

Number

0
1

Ports

Name	Type	IO Type	Number
dX	explicit	input	1
X0	explicit	input	2
Port 3	explicit	output	1
clk	activation	input	1
reset	activation	input	2