Modulo

This block implements the remainder after the division function. The block provides two options: Modulo and Remainder. Modulo(u1,u2) returns u1-floor(u1/u2)*u2 and Remainder(u1,u2) returns u1-int(u1/u2)*u2

Modulo

Library

MathOperations

Description

The Modulo block implements the remainder after the division function.

The block provides two options: Modulo and Remainder. Modulo(u1,u2) returns u1-floor(u1/u2)*u2 and Remainder(u1,u2) returns u1-int(u1/u2)*u2.

When u2 is 0, the output is considered to be u1.

The input datatype should be either double or integer.

Parameters

Modulo_0

Name	Label	Description	Data Type	Valid Values
op	Function		String	'Modulo' 'Remainder'
zc	Apply zero crossing	Enables the detection of zero crossings.	Scalar	0 1
externalActivation	External activation	Specifies whether the block receives an external activation or inherits its activation through its regular input ports. When External Activation is selected, an additional activation port is added to the block. By default, external activation is not selected.	Number	0 1

Name

Label

Description

Data Type

Valid Values

Function

String

'Modulo'
'Remainder'

Apply zero crossing

Enables the detection of zero crossings.

Scalar

0
1

externalActivation

External activation

Specifies whether the block receives an external activation or inherits its activation through its regular input ports. When External Activation is selected, an additional activation port is added to the block. By default, external activation is not selected.

Number

0
1

Ports

Name	Type	Description	IO Type	Number
Port 1	explicit		output	1
Port 2	explicit	The input data to be divided.	input	1
Port 3	explicit	The divisor.	input	2
Port 4	activation		input	externalActivation

Advanced Properties

Name	Value	Description
always active	no	Standard mode is used.
direct-feedthrough	yes
zero-crossing	no
mode	no
continuous-time state	no
discrete-time state	no