model SimpleBend "Bend"
import HydraulicsByFluidon.Media.Base.FluidInterface;
parameter Modelica.SIunits.Length Diameter = 0.032 "Diameter";
parameter Modelica.SIunits.Angle BendAngle(min = 0.005555555555556 * (15 * Modelica.Constants.pi), max = 0.005555555555556 * (180 * Modelica.Constants.pi)) = 0.5 * Modelica.Constants.pi "Bend angle";
parameter Modelica.SIunits.Length BendRadius(min = 1e-4) = 0.1 "Bend radius";
parameter Modelica.SIunits.DimensionlessRatio relRoughness = 1e-6 "Relative roughness";
parameter Boolean forwardFluidProperties = true "Forward fluid properties between ports";
HydraulicsByFluidon.Interfaces.FluidPort fluidPortA(p(start = 101325, nominal = 100000)) "Hydraulic port A";
HydraulicsByFluidon.Interfaces.FluidPort fluidPortB(p(start = 101325, nominal = 100000)) "Hydraulic port B";
equation
/* Implementation is Protected */
end SimpleBend;