Reference: Marker
Model ElementA Reference_Marker defines an orthonormal, righthanded coordinate system and reference frame in MotionSolve. A Reference_Marker must belong to a body. The body can be any type: rigid, flexible, or point.
Description
The Newtonian reference frame (Ground) is considered to be a special case of a rigid body.
In the image above, N represents the Newtonian reference frame and coordinate system. It consists of a global origin O and three righthanded, mutually perpendicular directions denoted as OX, OY, and OZ.
M represents another coordinate system of interest. The origin of M is denoted by oM, and the axes of M are denoted as xM, yM, and zM. For this example, assume M is fixed with respect to N.
To define M, the measure numbers of the vector OoM in the coordinate system N are needed. This is denoted as r in the image.
The rotation matrix that converts from the xMyMzM basis to the xyz basis is needed. This is denoted as NAM in the image.
 The vector r.
 The matrix NAM.
 The body to which it belongs.
 Defining reference coordinate systems (LPRF) for rigid bodies, flexible bodies, and point masses.
 Specifying the connections in constraint elements.
 Specifying the connections in force elements.
 Defining reference coordinate systems for Reference_Curve, Reference_Surface, and Post_Graphic.
 Defining output channels for measurement of displacements, velocities, and accelerations.
The Reference_Marker with id = 0 has special significance. In all MotionSolve expressions, it is used to denote the global coordinate system.
The attribute node_id is optional. It is used only for flexible bodies.
Format
<Reference_Marker
id = "integer"
[ label = "string" ]
body_id = "integer"
[ body_type = {"RIGIDBODY"  "FLEXBODY"  "POINTBODY"} ]
[ rm_id = "integer" ]
[ node_id = "integer" ]
{
pos_x = "real"
pos_y = "real"
pos_z = "real"
[{
a00 = "real"
a10 = "real"
a20 = "real"
a01 = "real"
a11 = "real"
a21 = "real"
a02 = "real"
a12 = "real"
a22 = "real"

psi = "real"
theta = "real"
phi = "real"

yaw = "real"
pitch = "real"
roll = "real"

e0 = "real"
e1 = "real"
e2 = "real"
e3 = "real"
}]
}

{
usrsub_param_string = "USER(..,..)"
usrsub_fnc_name = "valid fnc name"
usr_dll_name = "valid dll name"

usrsub_param_string = "USER(..,..)"
usrsub_fnc_name = "valid fnc name"
interpreter = "string
script_name = "valid script name"
}
/>
Attributes
 id
 Element identification number (integer>0). This number is unique to all Reference_Marker elements.
 label
 The name of the Reference_Marker element.
 body_id
 ID of the body to which marker belongs. The body may be Ground, a rigid body, a point mass, or a flexible body.
 body_type

Specifies whether the body is of type RIGIDBODY, FLEXBODY or POINTBODY
This parameter is optional. The default type is RIGIDBODY.
 rm_id

An optional attribute that specifies the Reference_Marker ID. If specified, the position and orientation of the marker is assumed to be with respect to the reference marker.
The default ID is 0 which refers to the global reference frame.
 node_id
 An optional attribute used only for flexible bodies.
 pos_x, pos_y, pos_z
 The x, y, z coordinates of the marker origin specified in terms of the global frame. pos_x defines the xcoordinate of the origin, pos_y defines the ycoordinate of the origin, and pos_z defines the zcoordinate of the origin.
 a00 a01 a02
 a10 a11 a12
 a20 a21 a22
 Elements of the transformation matrix defining the orientation of the Reference_Marker with respect to the global frame.
 psi
 In radians, the rotation around the original zaxis.
 theta
 In radians, the rotation around the new xaxis after Psi has been applied.
 phi
 In radians, the rotation around the new zaxis after Theta has been applied.
 yaw
 In radians, the rotation around the original zaxis of the marker.
 pitch
 In radians, the rotation about the new location of the yaxis of the marker after yaw has been applied.
 roll
 In radians, the rotation about the new location of the xaxis after pitch has been applied.
 e0, e1, e2, e3
 Euler parameters that describe the rotation.
 usrsub_param_string
 The list of parameters that are passed from the data file to the user defined subroutine.
 usrsub_fnc_name
 Specifies an alternative name for the user subroutine MARKER_READ.
 usrsub_dll_name
 Specifies the path and name of the DLL or shared library containing the user subroutine. MotionSolve uses this information to load the user subroutine in the DLL at run time.
 script_name
 Specifies the path and name of the user written script that contains the routine specified by usrsub_fnc_name.
 interpreter
 Specifies the interpreted language that the user script is written in (example: "PYTHON"). See UserWritten Subroutines for a choice of valid interpreted languages.
Example
The following example defines a Reference_Marker on a rigid body.
<Reference_Marker
id = "1012"
body_id = "1000"
body_type = "RIGIDBODY"
pos_x = "1.414"
pos_y = "3.14159"
pos_z = "1.61804"
a00 = "0."
a10 = "1."
a20 = "0."
a01 = "0.041630503"
a11 = "0."
a21 = "0.99913307"
a02 = "0.99913307"
a12 = "0."
a22 = "0.04163050">
</Reference_Marker>
In the following example, only two of the columns of the DC matrix have been specified, namely those corresponding to the X and Z axes. The third column, corresponding to the Y axis, is computed using the vector cross product between the Z and X vectors.
<Reference_Marker
id = "90000072"
body_id = "30303"
body_type = "RigidBody"
pos_x = "130."
pos_y = "0."
pos_z = "50."
a00 = "0."
a10 = "1."
a20 = "0."
a02 = "0.447214"
a12 = "0."
a22 = "0.89442699"
/>
In the following example, the DC matrix is omitted, implying that it is an identity matrix. Note that pos_x, pos_y and pos_z have also been omitted, which implies that they are all zero by default.
<Reference_Marker
id = "90000072"
body_id = "30303"
body_type = "RigidBody"
/>
In the following example, the Reference_Marker is specified using a Python script.
<Reference_Marker
id = "30102040"
label = "Joint 3Marker I"
body_id = "30102"
body_type = "RigidBody"
usrsub_param_string = "USER(1,0.5,0.3,0.,1.57079633,1.57079633,1.57079633)"
interpreter = "Python"
script_name = "script/marker_read.py"
usrsub_fnc_name = "MARKER_READ"
/>
The script marker_read.py is defined below:
def MARKER_READ(id, par, npar):
eflg = 0
errflg = 0
r = 3*[0.0]
angle = 6*[0.0]
angle_type = int(par[0])
r[0] = par[1]
r[1] = par[2]
r[2] = par[3]
if angle_type==0: # DCMTX
angle[0] = par[4]
angle[1] = par[5]
angle[2] = par[6]
angle[3] = par[7]
angle[4] = par[8]
angle[5] = par[9]
elif (angle_type ==1)  (angle_type ==2): # Euler angles (313 or YPR)
angle[0] = par[4]
angle[1] = par[5]
angle[2] = par[6]
elif angle_type ==3: # Euler parameters
angle[0] = par[4]
angle[1] = par[5]
angle[2] = par[6]
angle[3] = par[7]
else:
errflg = 1;
return errflg
eflg = py_put_marker(id, r, angle_type, angle)
return errflg
Comments
 Reference_Markers on ground, point mass, and rigid body elements are fixed with respect to their reference coordinate system.
 Reference_Markers on flexible bodies can move with respect to body's reference coordinate system. This happens because the flexible body can deform during the simulation.
 Although it is valid to specify the full transformation matrix (also known as the Direction Cosine (DC) matrix), it is not necessary. You may specify any two axes and allow MotionSolve to compute the third using the vector cross product of the two given axes.
 If the DC matrix is not specified, it defaults to the identity matrix.