Block Format Keyword In this group, keywords are used to set default value, global parameter, analysis type, input/output print,
damping and ALE and CFD treatment for the whole model. For default value, it is still possible to overwrite in each
specific keywords.
Block Format Keyword Used to set default values for certain parameters in all shell properties, but options could still be changed in each
property set input and in this case, the latter will prevail.
Block Format Keyword Used to set default values for certain parameters in all solid properties and thick shells. The default values defined
here will be overwritten by any values entered on the individual property input.
Block Format Keyword In this group, keywords are used to set Rayleigh mass and stiffness damping coefficients, which apply to a set of
nodes used to stabilize the results.
Block Format Keyword In this group, keywords are used to combine material and property information (/PART), assemble model (/SUBSET) or define a separate model (//SUBMODEL).
Block Format Keyword Interfaces solve the contact and impact conditions between two parts of a model. Several interface types are available
in Radioss and use different contact treatments.
Block Format Keyword Radioss supports several different kinematic constraints, which are mainly used to impose acceleration, velocity, displacement
or temperature in structure or constraint the moving of structure. They are mutually exclusive for each degree-of-freedom
(DOF). Two kinematic conditions applied to the same node may be incompatible.
Block Format Keyword In Radioss the following load cases are available. Stress/strain as initial state could be considered by modeling, as well as
pressure, gravity, and thermal load.
Block Format Keyword Adaptive Meshing is used in metal forming to divide the element to better describe the geometry. /ADMESH/GLOBAL and /ADMESH/SET are not available for SPMD computation.
Optimization Keyword This manual contains the description of the keywords for the Radioss optimization. This manual is compatible with the version 2018 of Radioss.
Block Format Keyword In this group, keywords are used to set default value, global parameter, analysis type, input/output print,
damping and ALE and CFD treatment for the whole model. For default value, it is still possible to overwrite in each
specific keywords.
/DEF_SHELL Block Format Keyword Used to set default values for certain parameters in all shell properties, but options could still be changed in each property set input and in this case, the latter will prevail.
/DEF_SOLID Block Format Keyword Used to set default values for certain parameters in all solid properties and thick shells. The default values defined here will be overwritten by any values entered on the individual property input.
/DEFAULT/INTER/TYPE2 Block Format Keyword Defines interfaces TYPE2 default values.
/DEFAULT/INTER/TYPE7 Block Format Keyword Defines default value for TYPE7 interfaces.
/DEFAULT/INTER/TYPE11 Block Format Keyword Defines default values for TYPE11 interfaces.
/DEFAULT/INTER/TYPE19 Block Format Keyword Defines default values for TYPE19 interfaces.
/DEFAULT/INTER/TYPE24 Block Format Keyword Defines default values for all /INTER/TYPE24.
/DEFAULT/INTER/TYPE25 Block Format Keyword Defines default values for all /INTER/TYPE25.
/IMPLICIT Block Format Keyword This option allows different default values which are suitable for implicit calculations.
/SPHGLO Block Format Keyword Describes the SPH global parameters.
/STAMPING Block Format Keyword This option allows adapting error messages to stamping applications.