The Drawbeads panel allows you to create, update or remove drawbeads for incremental analysis.
How do I…
In the RADIOSS Incremental user profile:
1. | Enter a name for the drawbead. |
3. | Select the master elements and slave nodes (nodes that lie along the drawbead). The blank makes up the master surface. |
4. | You can either enter the force as a percent of that required for lockbead or calculate it from the drawbead dimensions. |
In the LS-DYNA Incremental user profile:
1. | Enter a name for the drawbead. |
3. | Set the option to box/no box. It is recommended that you define a box to limit the size of the master surface. |
4. | Select the master elements and slave nodes (nodes that lie along the drawbead). The blank makes up the master surface. |
5. | Define the drawbead depth (necessary to determine the correct displacement) and FS (coefficient of static friction) |
6. | You can either enter the force as a percent of that required for lockbead or calculate it from the drawbead dimensions. |
|
See also
Alphabetical List of HyperForm Panels