VoltageSIN

Time-dependent sine wave voltage source.

    VoltageSIN

Library

Analog/Basic

Description

The VoltageSin is a sinusoidal voltage source with a constant frequency.

The peak value or amplitude value is measured from zero (if the initial DC offset value is not set) or measured from the DC offset value (if given).

Parameters

VoltageSIN_0

NameLabelDescriptionData TypeValid Values

sp_SIN

SIN

String

sp_V0

Offset Voltage

The initial DC offset voltage (volts). Set to zero if you need a pure sinusoid.

Scalar

sp_V1

Voltage Amplitude

The undamped amplitude of the sinusoid, i.e. the peak value measured from zero or from the DC offset value.

Scalar

sp_Freq

Signal Frequency

The frequency of the sinusoid (Hertz)

Scalar

sp_Td

Time Delay

The time delay (seconds). Set to zero for the normal sinusoid.

Scalar

sp_Theta

Damping Factor

The damping factor. Set to zero for the normal sinusoid. This is used to apply an exponential decay to the sinusoid.

Scalar

sp_Phase

Signal Phase

The phase advance (degrees). Set to 90 if you need a cosine waveform.

Scalar

sp_Spice

Additional Spice Parameters

For more details, see Additional Spice Parameters.

String

Ports

NameTypeDescriptionIO TypeNumber

V+

implicit

Positive pin

1

V-

implicit

Negative pin

2