**Block Category:** Signal Consumer

**Description:** The display block displays the current
value of the input signal in any number of significant digits. You can select a
color for the displayed value, as well as a background color for the block.

The display block automatically expands to display vector and matrix elements in individual cells. To display text strings in their entirety, you may have to increase the value in the Total Digits box.

Use the Edit > Clear Plots/Display command to replace the value in the display block with zero values. For multi-line vector displays, the display shrinks to a single cell.

**Allow Room For Exponential Notation:** Expands the
display block so there is room for exponential notation. If you wish to have a
very small display block, perhaps for use in display mode, you should turn off
this parameter.

**Background Color:** Selects the background color of
the display.

**Fonts:** Selects the font used in the display.

**Override Default Color:** Allows the selected
background color to be displayed.

**Override Default Font:** Allows the selected font to be displayed.

**Fractional Digits:** Indicates the number of
fractional digits to be displayed. **Specify Factional Digits** must be
activated to select a value in **Fractional Digits**.

**Show Leading Zero For Exponential Notation:** Enables
leading zero to be displayed.

**Specify Fractional Digits:** Indicates that digits to
the right of the decimal point will be displayed. You specify the number of
fractional digits in the Fractional Digits box.

**Total Digits:** The number of displayed digits varies
depending on whether **Specify Fractional Digits** is activated.

• When **Specify Fractional Digits** is not activated, **Total
Digits** indicates the total number of digits that can be displayed. When the
total number of displayable digits is greater than the **Total Digits**
value, fractional digits are rounded up.

• When **Specify Fractional Digits** is activated, **Total Digits**
indicates the total number of magnitudinal digits that can be displayed (that
is, nonfractional digits). **Fractional Digits** lets you enter the total
number of fractional digits displayed.

The value you enter in **Total Digits** overrides the
setting of **High Precision Display** under Preferences in the dialog box for
the **Edit** > **Preferences** command. The default is 6.

**Use Hex Notation:** Displays the value as a
hexadecimal (base 16) number. This is a convenient notation to recognize bit
values, for example, hardware register bits.

**Value:** Controls the current value in the display.
The default is 1.