KC Card

The KC card facilitates the transferral of connector names from CADFEKO to POSTFEKO.

On the Solve/Run tab, in the Cables group, click the  Connector (KC) icon.



Figure 1. The KC - Cable connector label dialog.

Parameters:

Connector name
The name of the connector.
Define a cable connector label
Define a cable connector label with the following parameters.
Remove all KC type labels previously defined
This KC card does not define a load, but rather all previously defined KC labels are deleted. All the other input parameters of this card are ignored.
Connector position
Data point/node to access the geometrical coordinates of this connector.
Number of pins
The number of pins defined in the connector.