Allows the user to import an equivalent near field antenna using Feko near field files. Only Cartesian
and Cartesian Boundary types are supported.
Figure 1. Feko Near Field
Source Files
The user can import the E-Field (.efe) and H-Field
(.hfe) files
from Feko by pressing the
Browse button and selecting the files in
their hard drive.
Displacement
This parameter is a vector that specifies the translation applied to the
points when added to the simulation.
Orientation
This parameter allows the rotation applied to the points. There are
several ways the user can specify this rotation: by giving each of the
axis directions of the transformation, by specifying spherical rotation
angles, by specifying rotation angles on each axis or by specifying the
Z axis and a rotation angle.
If the Relative to reference plane check box is selected, the
displacement and rotation will be relative to the current reference plane coordinate
system.
When the user has finished setting up the parameters of the Feko Near Field Source, they need to press the
Save button in order to add the antenna to the
simulation.
