VoltageBridge2Pulse
Control of 2 pulse bridge rectifier
Library
Electrical/PowerConverters/ACDC/Control
Description
General information about controllers is summarized in Control.
This model provides two firing signal for Graetz bridge thyristor and half bridge rectifiers. The boolean
signal fire_p
is assigned to the thyristors connected with the positive DC output pin.
The boolean
signal fire_n
is assigned to the thyristors connected with the negative DC output pin.
Parameters
Name | Label | Description | Data Type | Valid Values |
---|---|---|---|---|
mo_f | f | Frequency | Scalar | |
mo_useConstantFiringAngle | useConstantFiringAngle | Use constant firing angle instead of signal input | Number | 0 |
mo_constantFiringAngle | constantFiringAngle | Firing angle | Scalar | |
mo_firingAngleMax | firingAngleMax | Maximum firing angle | Scalar |
Name | Label | Description | Data Type | Valid Values |
---|---|---|---|---|
mo_useFilter | useFilter | Enable use of filter | Scalar | true |
mo_fCut | fCut | Cut off frequency of filter | Scalar | |
mo_vStart | vStart | Start voltage of filter output | Scalar |
Name | Label | Description | Data Type | Valid Values |
---|---|---|---|---|
mo_firingAngle | firingAngle | firingAngle | Structure | |
mo_firingAngle/fixed | fixed | Cell of scalars | true | |
mo_firingAngle/start | start | Cell of scalars | ||
mo_fire_p | fire_p | fire_p | Structure | |
mo_fire_p/fixed | fixed | Cell of scalars | true | |
mo_fire_p/start | start | Cell of scalars | ||
mo_fire_n | fire_n | fire_n | Structure | |
mo_fire_n/fixed | fixed | Cell of scalars | true | |
mo_fire_n/start | start | Cell of scalars |
Ports
Name | Type | Description | IO Type | Number |
---|---|---|---|---|
ac_p | implicit | input | 1 | |
ac_n | implicit | output | 1 | |
fire_p | implicit | output | 2 | |
fire_n | implicit | output | 3 | |
Port 5 | implicit | Firing angle (rad) | input | 1-mo_useConstantFiringAngle |