Browsers

Use the browsers in HyperWorks CFD to create, review, and manage the parts,setup parameters, and post-processing entities used in your simulation.

By default, browsers open on the left side of the application. However, you can undock browsers so that they appear as a free-floating dialogs. You can also re-dock browsers on the right-side or the bottom of the application.

Part Browser

Use the Part Browser to create, organize, and manage the CAE part structure/hierarchy.

To open the Part Browser, click View > Part Browser from the menu bar.

The Part Browser displays the relationship between your model's parts/assemblies (), solid bodies (), and surface bodies ().

Solid bodies and surface bodies reflect the content within each part. Solid bodies contain a solid and surface bodies contain a group of surfaces. By reviewing the solid and surface bodies, you can get an idea of model.

New bodies are added to the browser when creating a new solid or surface. When you are ready to validate the model, all bodies should be solid bodies.


Figure 1.

Setup Browser

Use the Setup Browser to create, edit, and review your model's setup parameters.

To open the Setup Browser, click View > Setup Browser from the menu bar.

The Setup Browser contains the different categories of parameters that you can use to setup your simulation and any defined instances.

If you right-click on a parameter and select Create/Open, the corresponding ribbon and tool used to create that parameter are activated.

Once a parameter is defined, it is automatically added to the Setup Browser.

Similarly, you can right-click on a defined parameter in the browser and select Edit to quickly jump into the correct tool and change any options.



Figure 2.

Post Browser

Use the Post Browser to create, edit, and review post-processing visualizations and measurements.

To open the Post Browser, click View > Post Browser from the menu bar.
Note: The Post Browser is only available when working in the Post ribbon.

The Post Browser contains the model's parts, boundary visualizations, and defined post-processing entities.

You can use the following context menu options, in addition to standard functions like show/hide/isolate, while in the browser:

New Collection
Available on the Boundary Collections heading.
Creates a new boundary collection set. Default places all surfaces in a boundary group called "unassigned". You can also create collections By Surface Outputs, By Boundaries, By Radiation Surfaces, and By Solar Radiation.
Make Current
Controls which collection new boundary groups are added to.
When you create new boundary group by selecting surfaces, those surfaces will be removed from the existing boundary group.
Delete Empty Boundary Groups
Delete empty boundary groups in a collection.
Edit
Quickly jump into the entity's corresponding tool and change any options.
Create Subcollection
Available for boundary collections, boundaries, and boundary groups.
Splits them into further collections. Drag and drop to organize existing subcollections.
Remove From Subcollection
Remove selected from its current subcollection.
Delete Empty Subcollection
Delete subcollections that do not contain anything.


Figure 3.

Multiple Datasets

Multiple sets of data can be imported into the same session. After opening the first dataset, use File > Import to load others.

All datasets are rendered in the browser. The datasets are visible in the modeling window and you can control the visibility of any item of any dataset using the browser.

However, only active dataset entities can be selected in the modeling window and in tools like Slice Planes, Streamlines, and so on. Make a dataset active by right-clicking on in it in the browser and selecting Make Current.

To delete a dataset, right-click on it and select Delete.



Figure 4.