Standard Views

Captures images of the model in 4 standard views - Isometric, Left, Top and Front views.

  1. Right-click at the Report or Chapter level and select Report/Chapter > Add > Modules > Model Info > Standard Views.
  2. Below are the properties associated with the Standard Views module.


    Figure 1.
    Name
    Provide the name for the Standard Views module.
    Model
    Provide the location of the model in list of HyperMesh windows in the session.
    View Type
    Standard
    Creates the four standard views of the model- Isometric, Left, Top and Front.
    Predefined
    Executes a predefined script and attach the output as an image.
    Note: You must provide a script file path.