Package Modelica.Electrical.QuasiStationary.MultiPhase.IdealIdeal components for AC multiphase models
Package Modelica.Electrical.QuasiStationary.MultiPhase.Ideal
This package hosts ideal models for quasi stationary multiphase circuits. Quasi stationary theory can be found in the references.
Extends from Modelica.Icons.Package (Icon for standard packages).
| Name | Description |
|---|---|
IdealClosingSwitch | Multiphase ideal closer |
IdealCommutingSwitch | Multiphase ideal commuting switch |
IdealIntermediateSwitch | Multiphase ideal intermediate switch |
IdealOpeningSwitch | Multiphase ideal opener |
Idle | Idle branch |
Short | Short cut branch |
Model Modelica.Electrical.QuasiStationary.MultiPhase.Ideal.Idle
This model describes m simple idle branches considering the complex currents i = 0; it uses m single phase idle branches.
Extends from Modelica.Electrical.QuasiStationary.MultiPhase.Interfaces.TwoPlug (Two plugs with pin-adapter).
| Type | Name | Default | Description |
|---|---|---|---|
Integer | m | 3 | Number of phases |
| Type | Name | Description |
|---|---|---|
PositivePlug | plug_p | Positive quasi-static polyphase plug |
NegativePlug | plug_n | Negative quasi-static polyphase plug |
Model Modelica.Electrical.QuasiStationary.MultiPhase.Ideal.Short
This model describes m simple short branches considering the complex voltages v = 0; it uses m single phase short branches.
Extends from Modelica.Electrical.QuasiStationary.MultiPhase.Interfaces.TwoPlug (Two plugs with pin-adapter).
| Type | Name | Default | Description |
|---|---|---|---|
Integer | m | 3 | Number of phases |
| Type | Name | Description |
|---|---|---|
PositivePlug | plug_p | Positive quasi-static polyphase plug |
NegativePlug | plug_n | Negative quasi-static polyphase plug |
Model Modelica.Electrical.QuasiStationary.MultiPhase.Ideal.IdealCommutingSwitch
Contains m singlephase ideal commuting switches (Modelica.Electrical.QuasiStationary.SinglePhase.Ideal.IdealCommutingSwitch).
Use with care: This switch is only intended to be used for structural changes, not fast switching sequences, due to the quasistationary formulation.
Extends from Modelica.Electrical.MultiPhase.Interfaces.ConditionalHeatPort (Partial model to include conditional HeatPorts in order to describe the power loss via a thermal network).
| Type | Name | Default | Description |
|---|---|---|---|
Integer | m | 3 | Number of phases |
Resistance | Ron[m] | Closed switch resistance | |
Conductance | Goff[m] | Opened switch conductance | |
final Integer | mh | m | Number of heatPorts=number of phases |
Boolean | useHeatPort | false | =true, if all heat ports are enabled |
final Temperature | T[mh] | fill(293.15, m) | Fixed device temperatures if useHeatPort = false |
| Type | Name | Description |
|---|---|---|
HeatPort_a | heatPort[mh] | Conditional heat ports |
input BooleanInput | control[m] | true => p--n2 connected, false => p--n1 connected |
PositivePlug | plug_p | |
NegativePlug | plug_n2 | |
NegativePlug | plug_n1 |
Model Modelica.Electrical.QuasiStationary.MultiPhase.Ideal.IdealIntermediateSwitch
Contains m ideal intermediate switches (Modelica.Electrical.QuasiStationary.SinglePhase.Ideal.IdealIntermediateSwitch).
Use with care: This switch is only intended to be used for structural changes, not fast switching sequences, due to the quasistationary formulation.
Extends from Modelica.Electrical.MultiPhase.Interfaces.ConditionalHeatPort (Partial model to include conditional HeatPorts in order to describe the power loss via a thermal network).
| Type | Name | Default | Description |
|---|---|---|---|
Integer | m | 3 | Number of phases |
Resistance | Ron[m] | Closed switch resistance | |
Conductance | Goff[m] | Opened switch conductance | |
final Integer | mh | m | Number of heatPorts=number of phases |
Boolean | useHeatPort | false | =true, if all heat ports are enabled |
final Temperature | T[mh] | fill(293.15, m) | Fixed device temperatures if useHeatPort = false |
| Type | Name | Description |
|---|---|---|
HeatPort_a | heatPort[mh] | Conditional heat ports |
input BooleanInput | control[m] | true => p1--n2, p2--n1 connected, otherwise p1--n1, p2--n2 connected |
PositivePlug | plug_p1 | |
PositivePlug | plug_p2 | |
NegativePlug | plug_n2 | |
NegativePlug | plug_n1 |
Model Modelica.Electrical.QuasiStationary.MultiPhase.Ideal.IdealOpeningSwitch
Contains m ideal opening switches (Modelica.Electrical.QuasiStationary.SinglePhase.Ideal.IdealOpeningSwitch).
Use with care: This switch is only intended to be used for structural changes, not fast switching sequences, due to the quasistationary formulation.
Extends from Modelica.Electrical.QuasiStationary.MultiPhase.Interfaces.TwoPlug (Two plugs with pin-adapter) and Modelica.Electrical.MultiPhase.Interfaces.ConditionalHeatPort (Partial model to include conditional HeatPorts in order to describe the power loss via a thermal network).
| Type | Name | Default | Description |
|---|---|---|---|
Integer | m | 3 | Number of phases |
Resistance | Ron[m] | Closed switch resistance | |
Conductance | Goff[m] | Opened switch conductance | |
final Integer | mh | m | Number of heatPorts=number of phases |
Boolean | useHeatPort | false | =true, if all heat ports are enabled |
final Temperature | T[mh] | fill(293.15, m) | Fixed device temperatures if useHeatPort = false |
| Type | Name | Description |
|---|---|---|
PositivePlug | plug_p | Positive quasi-static polyphase plug |
NegativePlug | plug_n | Negative quasi-static polyphase plug |
HeatPort_a | heatPort[mh] | Conditional heat ports |
input BooleanInput | control[m] | true => switch open, false => p--n connected |
Model Modelica.Electrical.QuasiStationary.MultiPhase.Ideal.IdealClosingSwitch
Contains m ideal closing switches (Modelica.Electrical.QuasiStationary.SinglePhase.Ideal.IdealClosingSwitch).
Use with care: This switch is only intended to be used for structural changes, not fast switching sequences, due to the quasistationary formulation.
Extends from Modelica.Electrical.QuasiStationary.MultiPhase.Interfaces.TwoPlug (Two plugs with pin-adapter) and Modelica.Electrical.MultiPhase.Interfaces.ConditionalHeatPort (Partial model to include conditional HeatPorts in order to describe the power loss via a thermal network).
| Type | Name | Default | Description |
|---|---|---|---|
Integer | m | 3 | Number of phases |
Resistance | Ron[m] | Closed switch resistance | |
Conductance | Goff[m] | Opened switch conductance | |
final Integer | mh | m | Number of heatPorts=number of phases |
Boolean | useHeatPort | false | =true, if all heat ports are enabled |
final Temperature | T[mh] | fill(293.15, m) | Fixed device temperatures if useHeatPort = false |
| Type | Name | Description |
|---|---|---|
PositivePlug | plug_p | Positive quasi-static polyphase plug |
NegativePlug | plug_n | Negative quasi-static polyphase plug |
HeatPort_a | heatPort[mh] | Conditional heat ports |
input BooleanInput | control[m] | true => p--n connected, false => switch open |