The following Settings options are available for the Die Module user profile:
Settings Option |
Description |
UndercutTolerance |
Specifies the tolerance in angle (radians) to determine undercuts in the part. |
The following ProcessDefaults options are available for the Die Module user profile:
ProcessDefaults Option |
Description |
ToolOffsetFactor |
Offsets tools from the punch or die by value of thickness tool offset factor. You use this option primarily with the Tool build panel and in the Die Process. |
BinderDepth |
Determines the position of the binder in the stamping direction relative to the part. This is the minimum distance between a part and binder surface. You use this option primarily for binder creation. |
BinderOffset |
Determines the size of the binder relative to the part. You use this option primarily for binder creation. |
FlangeMinWidth |
Automatically detects the flanges in the part geometry based on the minimum flange width defined. |
FlangeMaxWidth |
Automatically detects the flanges in the part geometry based on the maximum flange width defined. |
DetectFlangeRadius |
Select Yes or No to automatically select the radius along with the flanges. Default is Yes. |