Settings Option
|
Description
|
DefaultProcess
|
Name of the process to display if the process contains no data.
|
AutoPosTol
(Auto Positioning Tolerence)
|
Lets you specify two values: 0 to Disable or 1 to Enable. Enable moves the tools during auto positioning to get roundoff numbers. This option is valid only for Auto Process.
|
AutoCompNames
|
Lets you specify two values: 0 to Disable or 1 to Enable. Components are set based on the pattern below for each tool object:
• | Die Pattern: Default string: die* |
• | Punch Pattern: Default string: punch* |
• | Blank Pattern: Default string: blank* |
• | Binder Pattern: Default string: binder* |
• | Support Pattern: Default string: support* or pad* |
• | UpperBinder Pattern: Default string: upper* |
• | LowerBinder Pattern: Default string: lower* |
• | WiperPattern: Default string: wiper* |
|
CurveIntegration
|
Lets you specify two values: 0 to Disable or 1 to Enable. The Disable curve area is located in the details page of the AutoProcess. Default: 1.
|
CloseConfirmation,Setup
|
Asks for confirmation when you click Close in the setup page. Three options are available: 0: Never ask; 1: Ask if you have changed a value but have not clicked Apply; and 2: Always ask. Default: 0.
|
CloseConfirmation,Drawbeads
|
Asks for confirmation when you click Close in the setup Drawbead editor dialog. Three options are available: 0: Never ask; 1: Ask if you have changed a value but have not clicked Apply; and 2: Always ask. Default: 0.
|
CloseConfirmation,Details
|
Details
|
Displays the details page in Auto Process. Three options are available: 0: Hide; 1: Partial display; and 2: Full display. Default: 1.
|
UserMaterialPath
|
Points to the directory where the materials you created are stored.
|
MaterialDatabase
|
Points to the location of the material database that is included with the HyperForm installation.
|
RADIOSS_ARGUMENTS
|
Arguments to be passed on for the solver run. Defaults:
• | –both : Run both starter and Engine |
• | –noh3d : Don’t generate h3d file after solver run |
• | –nproc : Sets number processors for the solver run. Default = 1. |
|
RADIOSS_PC
|
Points to the location of the RADIOSS solver launch script that is included with the HyperForm installation for the Windows platform.
|
RADIOSS_UNIX
|
Points to the location of the RADIOSS solver launch script that is included with the HyperForm installation for the Linux platform.
|
SymmetryTolerance
|
Specifies Tolerance to identify nodes that define constraints based on the symmetry plane definition in the User Process and Auto Process.
|
DistanceCalc
|
Specifies the method for distance calculation in the User process and Auto Process. Lets you specify two values: 1: Old method; 2: New method. Default value: 2.
|
Drawbeads
|
Option to turn On and Off the Drawbead editor from the Auto Process. Lets you specify two values: 1: Enabled; 0: Disabled. Default value: 1.
|
WindowGeometry
|
Applies default window geometry size and location: 640x520+0-30.
|
MSM_Autoposition
|
Enables or disables the Autoposition option in the Multistage manager. Lets you specify two values: 1: Enabled; 0: Disabled. Default value: 1.
|
DB_DoNotProjectLines
|
Does not to project the drawbead lines on the target tool. Lets you specify two values: 1: Enabled; 0: Disabled. Default value: 0.
|
AutopositionConfirm
|
Asks for confirmation before performing the Autoposition option in the User Process. Lets you specify two values: 0: No; 1: Yes. Default value: 1.
|
AutoprocessWindow
|
Displays Auto Process. Two display options are available: Panel or Window. Default: Panel.
|
MultistageWindow
|
Option to display Multistage manager process. Two display options are available: Panel or Window. Default: Panel.
|
UserProcessDirectory
|
Lets you specify the directory to store the User process templates. By default, the directory is empty.
|