Manufacturing Solutions

Display Toolbar

Display Toolbar

 Previous topic Next topic No expanding text in this topic  

Display Toolbar

 Previous topic Next topic JavaScript is required for expanding text JavaScript is required for the print function  

The Display toolbar controls what entities are displayed in the graphics area, primarily by masking entities in order to hide or display them. You can the toolbar on and off from View > Toolbars.

display_toolbar

The following table describes the left- and right-click commands for each icon on the toolbar:

 

Icon

LEFT-Click Operation

RIGHT-Click Operation

selectElemsByBoxMask-24

Mask

Left-click to open Mask panel.

selectElemsByReverseMask-24

Reverse Elements

Left-click to reverse the mask state of all elements in currently displayed components.

Reverse All

Right-click to reverse the mask state of all entities (elements, loads, etc.) in currently displayed collectors.

selectElemsByAdjacentMask-24

Unmask Adjacent

Left-click to unmask the adjacent row of elements to the currently displayed elements.  This operation turns on the display of currently displayed off components if any adjacent elements reside in those components.

Same

selectElemsUnmaskAll-24

Unmask All

Left-click to unmask all entities (elements, loads, etc.) in currently displayed collectors.

Same

selectElemsByBoxUnmask-24

Mask Not Shown

Left-click to mask all entities (elements, loads, etc.) that are in currently displayed collectors and that are not currently shown in the graphics area because a portion of the model has been translated/rotated off the graphics area.

Unmask Shown

Right-click to unmask all entities (elements, loads, etc…) which are in currently displayed collectors and which are currently masked and would be shown in the graphics area if unmasked.

displaySphericalClipping-24

Spherical Clipping

Left-click to open the Spherical Clipping panel. From this panel, select a center point and radius for the spherical clipping and click Enable.  Click disable to disable spherical clipping.

Hidden Line panel

Right-click to open Hidden Line panel.

search-24

Find

Left-click to open the Find panel.

Same

infoNumbers-24

Display Numbers

Left-click to open the Numbers panel.

Same

displayElemHandles-24

Display Element Handles

Left-click to toggle on/off element handles.  You can perform the same operation from Options > Graphics panel.

Same

displayLoadOptions-24

Display Load Handles

Left-click to toggle on/off load handles.  You can perform the same from the Options > Graphics panel.

Same

display_load

Display Load

Left-click to toggle on/off the display of loads with tail or head on the element surface. You can perform the same operation from the Options > Graphics panel.

Same

displayFixedPoints-24

Display Fixed Points

Left-click to toggle on/off fixed points. You can perform the same operation from the Options > Graphics panel.

Same