::hwat::utils::PositionOOPDummy

Position the "Out of Position" driver or passenger dummy.

Syntax

PositionOOPDummy node1 node2 node3 node4 vehicleAssem rootSysId headAssem chestAssem lowerTorsoAssem chestNode hPointXYZ upperSplinePlateNode lowerSplinePlateNode location type option [chinNode] [wheelCompsList] [headNode]

Arguments

node1
The node 1 of the airbag.
node2
The node 2 of the airbag.
node3
The node 3 of the airbag.
node4
The node 4 of the airbag.
vehicleAssem
The name of the vehicle assembly.
rootSysId
The ID of the dummy root system.
headAssem
The name of the dummy head assembly.
chestAssem
The name of the dummy chest assembly.
lowerTorsoAssem
The name of the lower torso assembly.
chestNode
The ID of the chest node of the dummy.
hPointXYZ
A Tcl list containing the x,y, and z coordinates of the H point of the dummy.
upperSplinePlateNode
The ID of the upper spline plate node.
lowerSplinePlateNode
The ID of the lower spline plate node.
location
The location of the template file.
type
Either driver or passenger.
option
Either 1 or 2
If type is driver:
  1. Chin on module.
  2. Chin on wheel.
If type is passenger:
  1. Head on module.
  2. Chest on module.
chinNode

The ID of the chin node. Required only if the type is driver.

Default = ""
wheelCompsList
A Tcl list of the wheel components IDs. Required only if the type is driver and option is 2.
Default = ""
headNode
The ID of the head node. Required only if the type is passenger and the option is 1.
Default = ""

Returns

Success
1
Failure
{}

Example

::hwat::utils::PositionOOPDummy 104898 106442 106322 102157 "VEHICLE" 12059 "Head And Neck" "Thorax" "Lower Torso" 1500000 [list 3100 -370 500] 1511266 1511267 "D:/Altair/hw6.0/templates/feoutput/ls-dyna/dyna.key" "driver" 1 1503588

Comments

This function assumes that the dummy has been imported.