Adding a Waveguide Source

Add a waveguide source to the first port using the fundamental mode.

Note: Default values are used in this example. The fundamental mode for this source will be excited (TE10).

Add multiple modes as a single source by selecting Specify modes manually.

  1. On the Source/Load tab, in the Sources on Ports group, click the  Waveguide Source icon.
  2. In the drop-down list, select WvaeguidePort1.

    Figure 1. The Create Waveguide Source dialog.
  3. Click Create to create the source and to close the dialog.

Figure 2. A port with a source is indicated in red.