Package Modelica.Electrical.PowerConverters.ACDCAC to DC converters
Package Modelica.Electrical.PowerConverters.ACDC
General information about AC/DC converters can be found at the AC/DC converter concept
Extends from Modelica.Icons.Package (Icon for standard packages).
| Name | Description |
|---|---|
Control … | Control components for rectifiers |
DiodeBridge2mPulse | 2*m pulse diode rectifier bridge |
DiodeBridge2Pulse | Two pulse Graetz diode rectifier bridge |
DiodeCenterTap2mPulse | 2*m pulse diode rectifier with center tap |
DiodeCenterTap2Pulse | Two pulse diode rectifier with center tap |
DiodeCenterTapmPulse | m pulse diode rectifier with center tap |
HalfControlledBridge2mPulse | 2*m pulse half controlled rectifier bridge |
HalfControlledBridge2Pulse | Two pulse Graetz half controlled rectifier bridge |
ThyristorBridge2mPulse | 2*m pulse thyristor rectifier bridge |
ThyristorBridge2Pulse | Two pulse Graetz thyristor rectifier bridge |
ThyristorCenterTap2mPulse | 2*m pulse thyristor rectifier with center tap |
ThyristorCenterTap2Pulse | Two pulse thyristor rectifier with center tap |
ThyristorCenterTapmPulse | m pulse thyristor rectifier with center tap |
Model Modelica.Electrical.PowerConverters.ACDC.DiodeBridge2Pulse
General information about AC/DC converters can be found at the AC/DC converter concept
This is a two pulse Graetz diode rectifier bridge. The circuit topology is the same as in Examples.ACDC.RectifierCenterTap2Pulse.
Extends from Modelica.Electrical.PowerConverters.Icons.Converter (Converter icon), Modelica.Electrical.PowerConverters.Interfaces.ACDC.ACtwoPin (Positive and negative AC pin), Modelica.Electrical.PowerConverters.Interfaces.ACDC.DCtwoPin (Positive and negative DC pins), and Modelica.Electrical.Analog.Interfaces.ConditionalHeatPort (Partial model to include a conditional HeatPort in order to describe the power loss via a thermal network).
| Type | Name | Default | Description |
|---|---|---|---|
Resistance | RonDiode | 1e-5 | Closed diode resistance |
Conductance | GoffDiode | 1e-5 | Opened diode conductance |
Voltage | VkneeDiode | 0 | Diode forward threshold voltage |
Boolean | useHeatPort | false | =true, if heatPort is enabled |
final Temperature | T | 293.15 | Fixed device temperature if useHeatPort = false |
| Type | Name | Description |
|---|---|---|
PositivePin | ac_p | Positive AC input |
NegativePin | ac_n | Negative AC input |
PositivePin | dc_p | Positive DC output |
NegativePin | dc_n | Negative DC output |
HeatPort_a | heatPort | Conditional heat port |
Model Modelica.Electrical.PowerConverters.ACDC.ThyristorBridge2Pulse
General information about AC/DC converters can be found at the AC/DC converter concept
This is a two pulse Graetz thyristor rectifier bridge. The firing signal fire_p are connected
with thyristor thyristor_p1 and thyristor_n2.
The firing signal fire_n are connected
with thyristor thyristor_p2 and thyristor_n1. See example
Examples.ACDC.RectifierCenterTap2Pulse.
Extends from Modelica.Electrical.PowerConverters.Icons.Converter (Converter icon), Modelica.Electrical.PowerConverters.Interfaces.ACDC.ACtwoPin (Positive and negative AC pin), Modelica.Electrical.PowerConverters.Interfaces.ACDC.DCtwoPin (Positive and negative DC pins), Modelica.Electrical.Analog.Interfaces.ConditionalHeatPort (Partial model to include a conditional HeatPort in order to describe the power loss via a thermal network), and Modelica.Electrical.PowerConverters.Interfaces.Enable.Enable2 (Partial model providing enable parameter and optional enable input for two firing signals).
| Type | Name | Default | Description |
|---|---|---|---|
Resistance | RonThyristor | 1e-5 | Closed thyristor resistance |
Conductance | GoffThyristor | 1e-5 | Opened thyristor conductance |
Voltage | VkneeThyristor | 0 | Thyristor forward threshold voltage |
Boolean | offStart_p1 | true | Boolean start value of variable thyristor_p1.off |
Boolean | offStart_p2 | true | Boolean start value of variable thyristor_p2.off |
Boolean | offStart_n1 | true | Boolean start value of variable thyristor_n1.off |
Boolean | offStart_n2 | true | Boolean start value of variable thyristor_n2.off |
Boolean | useHeatPort | false | =true, if heatPort is enabled |
final Temperature | T | 293.15 | Fixed device temperature if useHeatPort = false |
Boolean | useConstantEnable | true | true = disabled boolean input, use constantEnable |
Boolean | constantEnable | true | Constant enabling of firing signals |
final Integer | m | 1 | Number of phases |
| Type | Name | Description |
|---|---|---|
PositivePin | ac_p | Positive AC input |
NegativePin | ac_n | Negative AC input |
PositivePin | dc_p | Positive DC output |
NegativePin | dc_n | Negative DC output |
HeatPort_a | heatPort | Conditional heat port |
input BooleanInput | enable | Enables fire and notFire |
input BooleanInput | fire_p | Firing signal of positive potential transistor |
input BooleanInput | fire_n | Firing signal of negative potential transistor |
Model Modelica.Electrical.PowerConverters.ACDC.HalfControlledBridge2Pulse
General information about AC/DC converters can be found at the AC/DC converter concept
This is a two pulse Graetz half controlled rectifier bridge. The firing signal fire_p is connected
with thyristor thyristor_p1.
The firing signal fire_n is connected
with thyristor thyristor_p2.
The circuit topology is the same as in
Examples.ACDC.RectifierCenterTap2Pulse.
Extends from Modelica.Electrical.PowerConverters.Icons.Converter (Converter icon), Modelica.Electrical.PowerConverters.Interfaces.ACDC.ACtwoPin (Positive and negative AC pin), Modelica.Electrical.PowerConverters.Interfaces.ACDC.DCtwoPin (Positive and negative DC pins), Modelica.Electrical.Analog.Interfaces.ConditionalHeatPort (Partial model to include a conditional HeatPort in order to describe the power loss via a thermal network), and Modelica.Electrical.PowerConverters.Interfaces.Enable.Enable2 (Partial model providing enable parameter and optional enable input for two firing signals).
| Type | Name | Default | Description |
|---|---|---|---|
Resistance | RonDiode | 1e-5 | Closed diode resistance |
Conductance | GoffDiode | 1e-5 | Opened diode conductance |
Voltage | VkneeDiode | 0 | Diode forward threshold voltage |
Resistance | RonThyristor | 1e-5 | Closed thyristor resistance |
Conductance | GoffThyristor | 1e-5 | Opened thyristor conductance |
Voltage | VkneeThyristor | 0 | Thyristor forward threshold voltage |
Boolean | offStart_p1 | true | Boolean start value of variable thyristor_p1.off |
Boolean | offStart_p2 | true | Boolean start value of variable thyristor_p2.off |
Boolean | useHeatPort | false | =true, if heatPort is enabled |
final Temperature | T | 293.15 | Fixed device temperature if useHeatPort = false |
Boolean | useConstantEnable | true | true = disabled boolean input, use constantEnable |
Boolean | constantEnable | true | Constant enabling of firing signals |
final Integer | m | 1 | Number of phases |
| Type | Name | Description |
|---|---|---|
PositivePin | ac_p | Positive AC input |
NegativePin | ac_n | Negative AC input |
PositivePin | dc_p | Positive DC output |
NegativePin | dc_n | Negative DC output |
HeatPort_a | heatPort | Conditional heat port |
input BooleanInput | enable | Enables fire and notFire |
input BooleanInput | fire_p | Firing signal of positive potential transistor |
input BooleanInput | fire_n | Firing signal of negative potential transistor |
Model Modelica.Electrical.PowerConverters.ACDC.DiodeCenterTap2Pulse
General information about AC/DC converters can be found at the AC/DC converter concept
This is a two pulse diode rectifier with center tap. In order to operate this rectifier a voltage with center tap is required. The center tap has to be connected with the negative pin of the load. The circuit topology is the same as in Examples.ACDC.RectifierCenterTap2Pulse.
Extends from Modelica.Electrical.PowerConverters.Icons.Converter (Converter icon), Modelica.Electrical.PowerConverters.Interfaces.ACDC.ACtwoPin (Positive and negative AC pin), Modelica.Electrical.PowerConverters.Interfaces.ACDC.DCpin (Single DC pin), and Modelica.Electrical.Analog.Interfaces.ConditionalHeatPort (Partial model to include a conditional HeatPort in order to describe the power loss via a thermal network).
| Type | Name | Default | Description |
|---|---|---|---|
Resistance | RonDiode | 1e-5 | Closed diode resistance |
Conductance | GoffDiode | 1e-5 | Opened diode conductance |
Voltage | VkneeDiode | 0 | Diode forward threshold voltage |
Boolean | useHeatPort | false | =true, if heatPort is enabled |
final Temperature | T | 293.15 | Fixed device temperature if useHeatPort = false |
| Type | Name | Description |
|---|---|---|
PositivePin | ac_p | Positive AC input |
NegativePin | ac_n | Negative AC input |
PositivePin | dc_p | Positive DC output |
HeatPort_a | heatPort | Conditional heat port |
Model Modelica.Electrical.PowerConverters.ACDC.ThyristorCenterTap2Pulse
General information about AC/DC converters can be found at the AC/DC converter concept
This a two pulse thyristor rectifier with center tap. In order to operate this rectifier a voltage with center tap is required. The center tap has to be connected with the negative pin of the load. The circuit topology is the same as in Examples.ACDC.RectifierCenterTap2Pulse.
Extends from Modelica.Electrical.PowerConverters.Icons.Converter (Converter icon), Modelica.Electrical.PowerConverters.Interfaces.ACDC.ACtwoPin (Positive and negative AC pin), Modelica.Electrical.PowerConverters.Interfaces.ACDC.DCpin (Single DC pin), Modelica.Electrical.Analog.Interfaces.ConditionalHeatPort (Partial model to include a conditional HeatPort in order to describe the power loss via a thermal network), and Modelica.Electrical.PowerConverters.Interfaces.Enable.Enable2 (Partial model providing enable parameter and optional enable input for two firing signals).
| Type | Name | Default | Description |
|---|---|---|---|
Resistance | RonThyristor | 1e-5 | Closed thyristor resistance |
Conductance | GoffThyristor | 1e-5 | Opened thyristor conductance |
Voltage | VkneeThyristor | 0 | Thyristor forward threshold voltage |
Boolean | offStart_p | true | Boolean start value of variable thyristor_p.off |
Boolean | offStart_n | true | Boolean start value of variable thyristor_n.off |
Boolean | useHeatPort | false | =true, if heatPort is enabled |
final Temperature | T | 293.15 | Fixed device temperature if useHeatPort = false |
Boolean | useConstantEnable | true | true = disabled boolean input, use constantEnable |
Boolean | constantEnable | true | Constant enabling of firing signals |
final Integer | m | 1 | Number of phases |
| Type | Name | Description |
|---|---|---|
PositivePin | ac_p | Positive AC input |
NegativePin | ac_n | Negative AC input |
PositivePin | dc_p | Positive DC output |
HeatPort_a | heatPort | Conditional heat port |
input BooleanInput | enable | Enables fire and notFire |
input BooleanInput | fire_p | Firing signal of positive potential transistor |
input BooleanInput | fire_n | Firing signal of negative potential transistor |
Model Modelica.Electrical.PowerConverters.ACDC.DiodeCenterTapmPulse
General information about AC/DC converters can be found at the AC/DC converter concept.
This is a m pulse diode rectifier with center tap. All voltage sources must have one interconnected plug (tap). This rectifiers works only with odd number of phases due the symmetry constrains of even phase numbers implemented in symmetricOrientation. The circuit topology is the same as in Examples.ACDC.RectifierCenterTapmPulse.
Extends from Modelica.Electrical.PowerConverters.Icons.Converter (Converter icon), Modelica.Electrical.PowerConverters.Interfaces.ACDC.ACplug (AC multi phase plug), Modelica.Electrical.PowerConverters.Interfaces.ACDC.DCpin (Single DC pin), and Modelica.Electrical.Analog.Interfaces.ConditionalHeatPort (Partial model to include a conditional HeatPort in order to describe the power loss via a thermal network).
| Type | Name | Default | Description |
|---|---|---|---|
Integer | m | 3 | Number of phases |
Resistance | RonDiode | 1e-5 | Closed diode resistance |
Conductance | GoffDiode | 1e-5 | Opened diode conductance |
Voltage | VkneeDiode | 0 | Diode forward threshold voltage |
Boolean | useHeatPort | false | =true, if heatPort is enabled |
final Temperature | T | 293.15 | Fixed device temperature if useHeatPort = false |
| Type | Name | Description |
|---|---|---|
PositivePlug | ac | AC input |
PositivePin | dc_p | Positive DC output |
HeatPort_a | heatPort | Conditional heat port |
Model Modelica.Electrical.PowerConverters.ACDC.ThyristorCenterTapmPulse
General information about AC/DC converters can be found at the AC/DC converter concept
This is a m pulse thyristor rectifier with center tap. All voltage sources must have one interconnected plug (tap). This rectifiers works only with odd number of phases due the symmetry constrains of even phase numbers implemented in symmetricOrientation. See example Examples.ACDC.RectifierCenterTapmPulse.
Extends from Modelica.Electrical.PowerConverters.Icons.Converter (Converter icon), Modelica.Electrical.PowerConverters.Interfaces.ACDC.ACplug (AC multi phase plug), Modelica.Electrical.PowerConverters.Interfaces.ACDC.DCpin (Single DC pin), Modelica.Electrical.Analog.Interfaces.ConditionalHeatPort (Partial model to include a conditional HeatPort in order to describe the power loss via a thermal network), and Modelica.Electrical.PowerConverters.Interfaces.Enable.Enable1m (Partial model providing enable parameter and optional enable input for m firing signals).
| Type | Name | Default | Description |
|---|---|---|---|
Resistance | RonThyristor | 1e-5 | Closed thyristor resistance |
Conductance | GoffThyristor | 1e-5 | Opened thyristor conductance |
Voltage | VkneeThyristor | 0 | Thyristor forward threshold voltage |
Boolean | offStart[m] | fill(true, m) | Boolean start value of variable thyristor_p[:].off |
Integer | m | 3 | Number of phases |
Boolean | useHeatPort | false | =true, if heatPort is enabled |
final Temperature | T | 293.15 | Fixed device temperature if useHeatPort = false |
Boolean | useConstantEnable | true | true = disabled boolean input, use constantEnable |
Boolean | constantEnable | true | Constant enabling of firing signals |
| Type | Name | Description |
|---|---|---|
PositivePlug | ac | AC input |
PositivePin | dc_p | Positive DC output |
HeatPort_a | heatPort | Conditional heat port |
input BooleanInput | fire_p[m] | Firing signals of positive potential transistors |
input BooleanInput | enable | Enables fire and notFire |
Model Modelica.Electrical.PowerConverters.ACDC.DiodeBridge2mPulse
General information about AC/DC converters can be found at the AC/DC converter concept
This is a 2*m pulse diode rectifier bridge. In order to operate this rectifier a voltage source with center tap is required. The circuit topology is the same as in Examples.ACDC.RectifierBridge2mPulse. It is important to note that for multi phase circuits with even phase numbers greater than three the MultiStarResistance shall be used for grounding the voltage sources.
Extends from Modelica.Electrical.PowerConverters.Icons.Converter (Converter icon), Modelica.Electrical.PowerConverters.Interfaces.ACDC.ACplug (AC multi phase plug), Modelica.Electrical.PowerConverters.Interfaces.ACDC.DCtwoPin (Positive and negative DC pins), and Modelica.Electrical.Analog.Interfaces.ConditionalHeatPort (Partial model to include a conditional HeatPort in order to describe the power loss via a thermal network).
| Type | Name | Default | Description |
|---|---|---|---|
Integer | m | 3 | Number of phases |
Resistance | RonDiode | 1e-5 | Closed diode resistance |
Conductance | GoffDiode | 1e-5 | Opened diode conductance |
Voltage | VkneeDiode | 0 | Diode forward threshold voltage |
Boolean | useHeatPort | false | =true, if heatPort is enabled |
final Temperature | T | 293.15 | Fixed device temperature if useHeatPort = false |
| Type | Name | Description |
|---|---|---|
PositivePlug | ac | AC input |
PositivePin | dc_p | Positive DC output |
NegativePin | dc_n | Negative DC output |
HeatPort_a | heatPort | Conditional heat port |
Model Modelica.Electrical.PowerConverters.ACDC.ThyristorBridge2mPulse
General information about AC/DC converters can be found at the AC/DC converter concept
This is a 2*m pulse thyristor rectifier bridge. In order to operate this rectifier a voltage source with center tap is required. It is important to note that for multi phase circuits with phase even phase numbers greater than three the MultiStarResistance shall be used for grounding the voltage sources. See example Examples.ACDC.RectifierBridge2mPulse.
Extends from Modelica.Electrical.PowerConverters.Icons.Converter (Converter icon), Modelica.Electrical.PowerConverters.Interfaces.ACDC.ACplug (AC multi phase plug), Modelica.Electrical.PowerConverters.Interfaces.ACDC.DCtwoPin (Positive and negative DC pins), Modelica.Electrical.Analog.Interfaces.ConditionalHeatPort (Partial model to include a conditional HeatPort in order to describe the power loss via a thermal network), and Modelica.Electrical.PowerConverters.Interfaces.Enable.Enable2m (Partial model providing enable parameter and optional enable input for 2*m firing signals).
| Type | Name | Default | Description |
|---|---|---|---|
Resistance | RonThyristor | 1e-5 | Closed thyristor resistance |
Conductance | GoffThyristor | 1e-5 | Opened thyristor conductance |
Voltage | VkneeThyristor | 0 | Thyristor forward threshold voltage |
Boolean | offStart_p[m] | fill(true, m) | Boolean start value of variable thyristor_p[:].off |
Boolean | offStart_n[m] | fill(true, m) | Boolean start value of variable thyristor_n[:].off |
Integer | m | 3 | Number of phases |
Boolean | useHeatPort | false | =true, if heatPort is enabled |
final Temperature | T | 293.15 | Fixed device temperature if useHeatPort = false |
Boolean | useConstantEnable | true | true = disabled boolean input, use constantEnable |
Boolean | constantEnable | true | Constant enabling of firing signals |
| Type | Name | Description |
|---|---|---|
PositivePlug | ac | AC input |
PositivePin | dc_p | Positive DC output |
NegativePin | dc_n | Negative DC output |
HeatPort_a | heatPort | Conditional heat port |
input BooleanInput | fire_p[m] | Firing signals of positive potential transistors |
input BooleanInput | enable | Enables fire and notFire |
input BooleanInput | fire_n[m] | Firing signals of negative potential transistors |
Model Modelica.Electrical.PowerConverters.ACDC.HalfControlledBridge2mPulse
General information about AC/DC converters can be found at the AC/DC converter concept
This is a 2*m pulse half controlled rectifier bridge. In order to operate this rectifier a voltage source with center tap is required. The circuit topology is the same as in Examples.ACDC.RectifierBridge2mPulse. It is important to note that for multi phase circuits with even phase numbers greater than three the MultiStarResistance shall be used for grounding the voltage sources.
Extends from Modelica.Electrical.PowerConverters.Icons.Converter (Converter icon), Modelica.Electrical.PowerConverters.Interfaces.ACDC.ACplug (AC multi phase plug), Modelica.Electrical.PowerConverters.Interfaces.ACDC.DCtwoPin (Positive and negative DC pins), Modelica.Electrical.Analog.Interfaces.ConditionalHeatPort (Partial model to include a conditional HeatPort in order to describe the power loss via a thermal network), and Modelica.Electrical.PowerConverters.Interfaces.Enable.Enable1m (Partial model providing enable parameter and optional enable input for m firing signals).
| Type | Name | Default | Description |
|---|---|---|---|
Resistance | RonDiode | 1e-5 | Closed diode resistance |
Conductance | GoffDiode | 1e-5 | Opened diode conductance |
Voltage | VkneeDiode | 0 | Diode forward threshold voltage |
Resistance | RonThyristor | 1e-5 | Closed thyristor resistance |
Conductance | GoffThyristor | 1e-5 | Opened thyristor conductance |
Voltage | VkneeThyristor | 0 | Thyristor forward threshold voltage |
Boolean | offStart_p[m] | fill(true, m) | Boolean start value of variable thyristor_p[:].off |
Integer | m | 3 | Number of phases |
Boolean | useHeatPort | false | =true, if heatPort is enabled |
final Temperature | T | 293.15 | Fixed device temperature if useHeatPort = false |
Boolean | useConstantEnable | true | true = disabled boolean input, use constantEnable |
Boolean | constantEnable | true | Constant enabling of firing signals |
| Type | Name | Description |
|---|---|---|
PositivePlug | ac | AC input |
PositivePin | dc_p | Positive DC output |
NegativePin | dc_n | Negative DC output |
HeatPort_a | heatPort | Conditional heat port |
input BooleanInput | fire_p[m] | Firing signals of positive potential transistors |
input BooleanInput | enable | Enables fire and notFire |
Model Modelica.Electrical.PowerConverters.ACDC.DiodeCenterTap2mPulse
General information about AC/DC converters can be found at the AC/DC converter concept
This is a 2*m pulse diode rectifier with center tap. In order to operate this rectifier a voltage source with center tap is required. The center tap has to be connected with the negative pin of the load. The circuit topology is the same as in Examples.ACDC.RectifierCenterTap2mPulse.
Extends from Modelica.Electrical.PowerConverters.Icons.Converter (Converter icon), Modelica.Electrical.PowerConverters.Interfaces.ACDC.ACtwoPlug (Two AC multi phase plugs), Modelica.Electrical.PowerConverters.Interfaces.ACDC.DCpin (Single DC pin), and Modelica.Electrical.Analog.Interfaces.ConditionalHeatPort (Partial model to include a conditional HeatPort in order to describe the power loss via a thermal network).
| Type | Name | Default | Description |
|---|---|---|---|
Integer | m | 3 | Number of phases |
Resistance | RonDiode | 1e-5 | Closed diode resistance |
Conductance | GoffDiode | 1e-5 | Opened diode conductance |
Voltage | VkneeDiode | 0 | Diode forward threshold voltage |
Boolean | useHeatPort | false | =true, if heatPort is enabled |
final Temperature | T | 293.15 | Fixed device temperature if useHeatPort = false |
| Type | Name | Description |
|---|---|---|
PositivePlug | ac_p | Positive potential AC input |
NegativePlug | ac_n | Negative potential AC input |
PositivePin | dc_p | Positive DC output |
HeatPort_a | heatPort | Conditional heat port |
Model Modelica.Electrical.PowerConverters.ACDC.ThyristorCenterTap2mPulse
General information about AC/DC converters can be found at the AC/DC converter concept
This is a 2*m pulse thyristor rectifier with center tap. In order to operate this rectifier a voltage source with center tap is required. The center tap has to be connected with the negative pin of the load. See example Examples.ACDC.RectifierCenterTap2mPulse.
Extends from Modelica.Electrical.PowerConverters.Icons.Converter (Converter icon), Modelica.Electrical.PowerConverters.Interfaces.ACDC.ACtwoPlug (Two AC multi phase plugs), Modelica.Electrical.PowerConverters.Interfaces.ACDC.DCpin (Single DC pin), Modelica.Electrical.Analog.Interfaces.ConditionalHeatPort (Partial model to include a conditional HeatPort in order to describe the power loss via a thermal network), and Modelica.Electrical.PowerConverters.Interfaces.Enable.Enable2m (Partial model providing enable parameter and optional enable input for 2*m firing signals).
| Type | Name | Default | Description |
|---|---|---|---|
Resistance | RonThyristor | 1e-5 | Closed thyristor resistance |
Conductance | GoffThyristor | 1e-5 | Opened thyristor conductance |
Voltage | VkneeThyristor | 0 | Thyristor forward threshold voltage |
Boolean | offStart_p[m] | fill(true, m) | Boolean start value of variable thyristor_p[:].off |
Boolean | offStart_n[m] | fill(true, m) | Boolean start value of variable thyristor_n[:].off |
Integer | m | 3 | Number of phases |
Boolean | useHeatPort | false | =true, if heatPort is enabled |
final Temperature | T | 293.15 | Fixed device temperature if useHeatPort = false |
Boolean | useConstantEnable | true | true = disabled boolean input, use constantEnable |
Boolean | constantEnable | true | Constant enabling of firing signals |
| Type | Name | Description |
|---|---|---|
PositivePlug | ac_p | Positive potential AC input |
NegativePlug | ac_n | Negative potential AC input |
PositivePin | dc_p | Positive DC output |
HeatPort_a | heatPort | Conditional heat port |
input BooleanInput | fire_p[m] | Firing signals of positive potential transistors |
input BooleanInput | enable | Enables fire and notFire |
input BooleanInput | fire_n[m] | Firing signals of negative potential transistors |