ModelMeshInfo
The quality of the mesh can be examined through these properties.
Example
application = cf.Application.getInstance() project = application:Load({FEKO_HOME..[[/shared/Resources/Automation/Waveguide_Divider.cfx]]}) geometry = project.Contents.Geometry["Union2"] -- Get the triangle count of the simulation mesh triangleCount = geometry.TriangleCount -- Ensure the average edge length of the model mesh is smaller than 2.0 mesh = geometry:UnlinkMesh() assert(mesh.ModelMeshInfo.AverageEdgeLength < 2.0)
Inheritance
The ModelMeshInfo object is derived from the Object object.
Usage locations
The ModelMeshInfo object can be accessed from the following locations:
- Properties
Property List
- AverageCurvilinearEdgeLength
- The average mesh curvilinear edge length. (Read only number)
- AverageCurvilinearSegmentLength
- The average mesh curvilinear segment length. (Read only number)
- AverageEdgeLength
- The average mesh edge length. (Read only number)
- AverageSegmentLength
- The average mesh segment length. (Read only number)
- AverageVoxelLength
- The average mesh voxel length. (Read only number)
- CableSegmentCount
- Get the total number of cable segment elements. (Read only number)
- CurvilinearEdgeStandardDeviation
- The standard deviation of curvilinear mesh edge length. (Read only number)
- CurvilinearSegmentCount
- The number of curvilinear line segments in the mesh. (Read only number)
- CurvilinearSegmentStandardDeviation
- The standard deviation of mesh curvilinear segment length. (Read only number)
- CurvilinearTriangleCount
- The number of curvilinear triangles in the mesh. (Read only number)
- EdgeStandardDeviation
- The standard deviation of mesh edge length. (Read only number)
- Label
- The object label. (Read/Write string)
- MaximumCurvilinearEdgeLength
- The maximum mesh curvilinear edge length. (Read only number)
- MaximumCurvilinearSegmentLength
- The maximum mesh curvilinear segment length. (Read only number)
- MaximumEdgeLength
- The maximum mesh edge length. (Read only number)
- MaximumElementAngle
- The maximum mesh element angle. (Read only number)
- MaximumSegmentLength
- The maximum mesh segment length. (Read only number)
- MaximumVoxelLength
- The maximum mesh voxel length. (Read only number)
- MeshElementCount
- Get the total number of mesh elements. (Read only number)
- MinimumCurvilinearEdgeLength
- The minimum mesh curvilinear edge length. (Read only number)
- MinimumCurvilinearSegmentLength
- The minimum mesh curvilinear segment length. (Read only number)
- MinimumEdgeLength
- The minimum mesh edge length. (Read only number)
- MinimumElementAngle
- The minimum mesh element angle. (Read only number)
- MinimumSegmentLength
- The minimum mesh segment length. (Read only number)
- MinimumVoxelLength
- The minimum mesh voxel length. (Read only number)
- PolygonCount
- The total number of polygons in the mesh. (Read only number)
- SegmentCount
- The total number of segments in the mesh. (Read only number)
- SegmentStandardDeviation
- The standard deviation of mesh segment length. (Read only number)
- TetrahedronCount
- The total number of tetrahedra in the mesh. (Read only number)
- TriangleCount
- The number of triangles in the mesh. This is including both flat and curvilinear triangles. (Read only number)
- Type
- The object type string. (Read only string)
- VoxelCount
- The number of FDTD voxels in the mesh. (Read only number)
- VoxelStandardDeviation
- The standard deviation of mesh voxel length. (Read only number)
Method List
- Delete ()
- Deletes the entity.
- Duplicate ()
- Duplicates the entity. (Returns a Object object.)
- GetProperties ()
- Returns a table of properties representing the state of the object. The properties table can be used with the SetProperties method to change multiple properties of the object in one step. (Returns a table object.)
- SetProperties (properties Object)
- Modifies the state of the object using the provided table of properties. This method is used to modify multiple properties of the object in a single step.
Static Function List
- GetDefaultProperties ()
- Creates a table containing the default settings to create an object. (Returns a table object.)
Property Details
- AverageCurvilinearEdgeLength
- The average mesh curvilinear edge length.
- Type
- number
- Access
- Read only
- AverageCurvilinearSegmentLength
- The average mesh curvilinear segment length.
- Type
- number
- Access
- Read only
- AverageEdgeLength
- The average mesh edge length.
- Type
- number
- Access
- Read only
- AverageSegmentLength
- The average mesh segment length.
- Type
- number
- Access
- Read only
- AverageVoxelLength
- The average mesh voxel length.
- Type
- number
- Access
- Read only
- CableSegmentCount
- Get the total number of cable segment elements.
- Type
- number
- Access
- Read only
- CurvilinearEdgeStandardDeviation
- The standard deviation of curvilinear mesh edge length.
- Type
- number
- Access
- Read only
- CurvilinearSegmentCount
- The number of curvilinear line segments in the mesh.
- Type
- number
- Access
- Read only
- CurvilinearSegmentStandardDeviation
- The standard deviation of mesh curvilinear segment length.
- Type
- number
- Access
- Read only
- CurvilinearTriangleCount
- The number of curvilinear triangles in the mesh.
- Type
- number
- Access
- Read only
- EdgeStandardDeviation
- The standard deviation of mesh edge length.
- Type
- number
- Access
- Read only
- Label
- The object label.
- Type
- string
- Access
- Read/Write
- MaximumCurvilinearEdgeLength
- The maximum mesh curvilinear edge length.
- Type
- number
- Access
- Read only
- MaximumCurvilinearSegmentLength
- The maximum mesh curvilinear segment length.
- Type
- number
- Access
- Read only
- MaximumEdgeLength
- The maximum mesh edge length.
- Type
- number
- Access
- Read only
- MaximumElementAngle
- The maximum mesh element angle.
- Type
- number
- Access
- Read only
- MaximumSegmentLength
- The maximum mesh segment length.
- Type
- number
- Access
- Read only
- MaximumVoxelLength
- The maximum mesh voxel length.
- Type
- number
- Access
- Read only
- MeshElementCount
- Get the total number of mesh elements.
- Type
- number
- Access
- Read only
- MinimumCurvilinearEdgeLength
- The minimum mesh curvilinear edge length.
- Type
- number
- Access
- Read only
- MinimumCurvilinearSegmentLength
- The minimum mesh curvilinear segment length.
- Type
- number
- Access
- Read only
- MinimumEdgeLength
- The minimum mesh edge length.
- Type
- number
- Access
- Read only
- MinimumElementAngle
- The minimum mesh element angle.
- Type
- number
- Access
- Read only
- MinimumSegmentLength
- The minimum mesh segment length.
- Type
- number
- Access
- Read only
- MinimumVoxelLength
- The minimum mesh voxel length.
- Type
- number
- Access
- Read only
- PolygonCount
- The total number of polygons in the mesh.
- Type
- number
- Access
- Read only
- SegmentCount
- The total number of segments in the mesh.
- Type
- number
- Access
- Read only
- SegmentStandardDeviation
- The standard deviation of mesh segment length.
- Type
- number
- Access
- Read only
- TetrahedronCount
- The total number of tetrahedra in the mesh.
- Type
- number
- Access
- Read only
- TriangleCount
- The number of triangles in the mesh. This is including both flat and curvilinear triangles.
- Type
- number
- Access
- Read only
- Type
- The object type string.
- Type
- string
- Access
- Read only
- VoxelCount
- The number of FDTD voxels in the mesh.
- Type
- number
- Access
- Read only
- VoxelStandardDeviation
- The standard deviation of mesh voxel length.
- Type
- number
- Access
- Read only
Method Details
- Delete ()
- Deletes the entity.
- Duplicate ()
- Duplicates the entity.
- Return
- Object
- The new (duplicated) entity.
- GetProperties ()
- Returns a table of properties representing the state of the object. The properties table can be used with the SetProperties method to change multiple properties of the object in one step.
- Return
- table
- A table defining the properties.
- SetProperties (properties Object)
- Modifies the state of the object using the provided table of properties. This method is used to modify multiple properties of the object in a single step.
- Input Parameters
- properties(Object)
- A table of properties defining the new state of the object.
Static Function Details
- GetDefaultProperties ()
- Creates a table containing the default settings to create an object.
- Return
- table
- A table containing the default properties.