/TABLE/1
Block Format Keyword Defines a table with up to four dimensions using functions and/or data points.
Format
(1)  (2)  (3)  (4)  (5)  (6)  (7)  (8)  (9)  (10) 

/TABLE/1/table_ID  
table_title  
dimension 
(1)  (2)  (3)  (4)  (5)  (6)  (7)  (8)  (9)  (10) 

X_{1}  Y_{1}  
etc  etc  
X_{n}  Y_{n} 
(1)  (2)  (3)  (4)  (5)  (6)  (7)  (8)  (9)  (10) 

fct_ID_{1}  A_{1}  Scale_y1  
etc  etc  etc  
fct_ID_{n}  A_{n}  Scale_yn 
(1)  (2)  (3)  (4)  (5)  (6)  (7)  (8)  (9)  (10) 

fct_ID_{1}  A_{1}  B_{1}  Scale_y1  
etc  etc  etc  etc  
fct_ID_{n}  A_{n}  B_{n}  Scale_yn 
(1)  (2)  (3)  (4)  (5)  (6)  (7)  (8)  (9)  (10) 

fct_ID_{1}  A_{1}  B_{1}  C_{1}  Scale_y1  
etc  etc  etc  etc  etc  
fct_ID_{n}  A_{n}  B_{n}  C_{n}  Scale_yn 
Definitions
Field  Contents  SI Unit Example 

table_ID  Table
identifier. (Integer, maximum 10 digits) 

table_title  Table
title. (Character, maximum 100 characters) 

dimension  Total number of
entries. (Integer ≤ 4) 

X_{i}  X_{n}  i^{th}
abscissa value, where 1 ≤ i ≤ n. (Real) 

Y_{i}  Y_{n}  i^{th}
ordinate value, where 1 ≤ i ≤ n. (Real) 

fct_ID_{i}  i^{th}
function identifier, where 1 ≤ i ≤ n. (Real) 

A_{i}  i^{th} A
value, corresponding to
fct_ID_{i},
where 1 ≤ i ≤ n. Default = 0 (Real) 

B_{i}  i^{th} B
value, corresponding to
fct_ID_{i},
where 1 ≤ i ≤ n. Default = 0 (Real) 

C_{i}  i^{th} C
value, corresponding to
fct_ID_{i},
where 1 ≤ i ≤ n. Default = 0 (Real) 

Scale_yi  Scale factor for the
ordinate of the i^{th}
function, where 1 ≤ i ≤ n. Default = 1 (Real) 
Example
 X
 Plastic strain
 Y
 Stress
For dimension=3, yield stress depending on plastic strain, strain rate and temperature could be considered.
 X
 Plastic strain
 Y
 Stress
 Ai
 Strain rate
 Bi
 Temperature
#12345678910
/TABLE/1/1007
table type 1 with dimension 1 (same like /FUNCT)
#DIMENSION
1
# X T
0 0
0.1 210
0.2 220
0.3 225
0.5 228
#12345678910
/TABLE/1/1008
table type 1 with dimension 3
#DIMENSION
3
# FCT_ID Y Z
4173 1 300 1
4174 5 300 1.2
#12345678910
/FUNCT/4173
New FUNCT 4713
# X Y
0 0
0.1 210
0.2 220
0.3 225
0.5 228
#12345678910
/FUNCT/4174
New FUNCT 4714
# X Y
0 0
0.1 210
0.2 220
0.3 225
0.5 228
#12345678910
#enddata
Comments
 The input of dimension=1 is similar to the input of a function /FUNCT.
 A function and a table cannot share the same identifier.
 Each function which is referenced can be defined through /FUNCT or /TABLE/1/table_ID and dimension=1.
 The abscissa of associated functions is considered as the first entry. Next, the input entries A, B and C are considered as second, third and fourth entries.
 A function must be associated to each possible combination of entries A, B, and C.
 The cards associating functions to the combinations of entries may be entered in an arbitrary order.
 Each function may have unique spacing and arbitrary number of points in their definition.
 The functions are completed up to the total number of abscissa values among all functions which are referenced into the table: each function is linearly extrapolated with a slope defined by the two first (resp. two last) points of the function. It is linearly interpolated between two consecutive points of the function.