Preferences: Inspire

Geometry

Preference	Description
Surface	Thickness: Define the default thickness used when creating surfaces.
Fillets	Radius: Define the default radius used when creating fillets.
Chamfers	Distance Angle: Define the default distance and angle used when creating chamfers. Distance Distance: Define the default distance 1 and distance 2 values used when creating chamfers.
Part Replace	Auto Position: If Auto Position is enabled when doing part replacement, Inspire reads the internal transformation of the part within the CAD file to position the part within an assembly. If this option is turned off, it reads the part in where the part was created, generally (0,0,0).
Partition	Default Offset: Define the default offset used when creating partitions.
Parts	Select to maintain part orientation when moving to a new assembly.
Autofind	Select to automatically find features upon entering tools.
STL	Export format: Select either ASCII or Binary as the export format for STL files. Export subdivision quality: Increase the level to create more triangles by splitting existing ones, maintaining the original geometry.
OBJ	Import Format: Select whether to convert to PolyNURBS or mesh when importing OBJ files.
Import from CAD File	Fastest import: Off (default): Use Check and heal (check each part and only heal when necessary) when importing CAD. Without diagnostics: The fastest CAD import option. With diagnostics: Turn on the ability to run a diagnostic test on the imported model to review issues with parts. For more information, see Clean Up CAD on Import. Import hidden parts: Select Yes to import hidden parts that exist in some CAD formats like Catia V5. Note that importing hidden parts makes the import slower. Healing: When importing a CAD model, choose how the application repairs geometry issues. Note: Healing is not available when the Fastest import options, Without diagnostics and With diagnostics, are turned on. Check and heal: Check each part and only heal when necessary. Always heal: Heal all parts without checking. No heal: Do not heal any parts. Split cylindrical faces: Enable this option to trim CAD cylinders on import.
Save to CAD format	Ignore deactivated parts: When saving a model as a Parasolid, IGES, STEP, ACIS (.sat, .sab), STL, VRML, or Evolve (.pn) file, use this option to indicate whether to include parts that have been deactivated. This setting does not have an impact when saving as Inspire Mold .imod files. Save parts in current positions: Select the checkbox to save parts in their current positions without maintaining transformations relative to the assembly. This simplifies the model structure when you import the data into your CAD system. Parasolid export version: Select the version of Parasolid that Inspire exports to. By default, files are currently exported to 28.1.
SimSolid: Face Faceting Parameters	SimSolid uses lightweight facets to represent part faces. Assembly, part names, and hierarchy are retained. Default facet settings should be sufficient for most geometries, but adjustments can be made. The following faceting parameters are used to control tessellation: Resolution: The Standard, Enhanced, and Fine options will calculate the face faceting parameters automatically. Select Custom to input each parameter manually. Chordal deviation (mm): The maximum distance between the actual part surface and the tessellated surface. Angular deviation (deg): Influences the tessellation of curves with relatively small radii in comparison to the overall CAD model.
PDM (Product Data Management)	Select the check box to Check for updated parts at a regular interval as specified in the Timer (minutes) field.

Recovery

Preference	Description
Recovery File	Create recovery file: Select this option to attempt to recover your model if the application closes unexpectedly, such as during a loss of power.
Recovery Playback	Step-by-step recovery on right-click: If this option is enabled when you load a recovery file, it allows you to right-click to progress through the sequence of actions that preceded the crash. You can resume the application normally at any time during the step-by-step process.

Mouse Controls

Preference	Description
Zoom Speed	Use to change the speed when zooming with the mouse.
Presets	This option defines the pan, view, and rotate controls assigned to the left and right mouse buttons, so they are the same as used in another application. Presets mouse controls for Inspire can be edited. To restore the preset values, click Use Defaults in the lower left corner of the Preferences window.

Visualization

Preference	Description
Visualization	Tessellation edge deviation: The maximum distance allowed between the edge and the geometry used to approximate it for rendering. A smaller deviation will result in better graphical quality but slower system performance. Tessellation surface deviation: The maximum distance allowed between the surface and the geometry used to approximate it for rendering. A smaller deviation will result in better graphical quality but slower system performance. Enable fading effects: Select this option to make a part slowly fade away when you hide it. We recommend that you deselect this option when working with large assemblies to improve performance. Show section cuts in part color: Show section cuts in the same color as the parts. Load labels: Select which constraint types are visible in the modeling window. Show Only Forces and Pressures Show All Show All with Magnitudes (default)
View Cube	Show view cube: Define when the View Cube is visible in the modeling window. Position: Define the position of the View Cube in the modeling window. Lower Left (default) Lower Right Upper Left Upper Right Show axis arrows: Display the x-, y-, and z-axes on the View Cube. Geometry: Define the View Cube's shape. Chamfered Cube (default) Simple Cube Show View Cube rotators: Define when the View Cube rotators are visible in the modeling window. Mouseover (default) Always Never Show View Cube reflectors: Define when the View Cube reflectors are visible in the modeling window. Mouseover Always Never (default) Increment angle: Define by how many degrees left- and right-clicking the arrows incrementally rotates the view. By default, left- and right-clicking increments by + and - 15 degrees.

Preference

Description

Visualization

Tessellation edge deviation: The maximum distance allowed between the edge and the geometry used to approximate it for rendering. A smaller deviation will result in better graphical quality but slower system performance.

Tessellation surface deviation: The maximum distance allowed between the surface and the geometry used to approximate it for rendering. A smaller deviation will result in better graphical quality but slower system performance.

Enable fading effects: Select this option to make a part slowly fade away when you hide it. We recommend that you deselect this option when working with large assemblies to improve performance.

Show section cuts in part color: Show section cuts in the same color as the parts.

Load labels: Select which constraint types are visible in the modeling window.

Show Only Forces and Pressures
Show All
Show All with Magnitudes (default)

View Cube

Show view cube: Define when the View Cube is visible in the modeling window.

Position: Define the position of the View Cube in the modeling window.

Lower Left (default)
Lower Right
Upper Left
Upper Right

Show axis arrows: Display the x-, y-, and z-axes on the View Cube.

Geometry: Define the View Cube's shape.

Chamfered Cube (default)
Simple Cube

Show View Cube rotators: Define when the View Cube rotators are visible in the modeling window.

Mouseover (default)
Always
Never

Show View Cube reflectors: Define when the View Cube reflectors are visible in the modeling window.

Mouseover
Always
Never (default)

Increment angle: Define by how many degrees left- and right-clicking the arrows incrementally rotates the view. By default, left- and right-clicking increments by + and - 15 degrees.

Mass Calculation

Preference	Description
Mass calculation	Right-click the column header in the Model Browser and select Mass to view masses. To improve overall performance, when a CAD file is imported the mass sizes are not calculated and are shown as ** in the Model Browser. Click the Calculate button to display the mass.

Move Tool

Preference	Description
Free Move: Show angles when editing tool position	By default only the X, Y, Z coordinates of the Move tool origin are shown in the microdialog. If this preference is selected, the angles are shown as well when editing the tool position.

Collision Detection

Preference	Description
Check for collisions	Define whether Inspire Mold should check for collisions between all parts, no parts, or only parts that specifically have collision detection applied.