The Diagnostics submenu contains the following macros:
|
Diagnostics |
Convert Comp CardsConverts component card images into property cards and assigns them to the elements in that component. This conversion is provided for backward compatibility. |
|
Overlapping ElementsChecks for overlapping elements in the model. |
|
Mesh Match RatioComputes the mesh match ratio. |
|
Occurrence NumberCreates a contour plot of the model’s occurrence number. |
|
Mesh ThicknessCreates a contour plot of element thickness |
|
Aspect RatioCreates a contour plot of aspect ratio of elements. This calculation is computed using the Moldflow formula. |
|
Check Element PropertyThis macro identifies elements that have a missing property card. It reports the number of such elements and also highlights those elements. |
|
SummaryOpens the Model Information dialog, which lists statistics about the current model, including part volume and the projected area in the XY plane. |
|
Contours |
|
Tools |
|
Split BC TetsSplits the Tet4 elements on the boundaries that have more than one face on the boundary condition. |
|
Organize ElementsOpens the Organize Elements dialog, from which you can organize elements based on thickness or element type. |
|
<<<BackOpens the main Moldflow Utility menu. |