The following element property cards are supported in the Moldflow user profile. Full support is available only for UDM-formatted (MPI 4.0 or later) export files. Only limited support is provided for the MFL file format.
Feed system and cooling circuit (based on beam elements) cards are supported by the Design Circuit macro; all other cards are supported by the Edit Prop Cards macro.
• | Part surface – midplane (tria3) |
• | Part surface – fusion (tria3) |
• | Feed system with beam elements |
• | Cooling circuit with beam elements |
• | Feed system with tria3 elements |
- | Cold gate surface – midplane |
- | Hot gate surface – midplane |
- | Cold sprue surface – fusion |
- | Cold runner surface – fusion |
- | Cold gate surface – fusion |
- | Hot sprue surface – fusion |
- | Hot runner surface – fusion |
- | Cold gate surface – fusion |
- | Overflow well – beam element |
- | Overflow well – shell element |
- | Preform surface – midplane |
- | Preform surface – fusion |
- | Part insert surface – fusion |
- | Over molding 2nd component 3D |
See Also:
Edit Prop Cards Submenu
Design Circuit Submenu
Diagnostics Submenu