CreateInitialNonMeshedCoilFor3DRadialMotor.PFM

Description

Create initial parametrized non-meshed coil for 3D radial motor.

Note: For more details about this macro, consult this additional document

Input

Enter name of the non-meshed coil
Enter radius of left part
Enter radius of right part
Enter radius of medium part of the coil
Enter Z length of straight part
Enter Z length of extra part
Enter Z length of stator lamination
Enter opening angle between in and out slots
Select coordinate system for defining the coil (cylindrical one)
Enter the whole number of coils to be created
Enter the angle between 2 stator slots (in degree)
Enter the radius of the non-meshed coil
Enter the radius between vertical and horizontal part
Enter the radius in the middle of top and bottom part
Select a coil conductor
Enter the number of turns
Select the mechanical set

Output

Create geometric parameters
Create initial non-meshed coil
Create coordinate systems for the other non-meshed coils to create (with DuplicateNonMeshedCoils.PFM macro)