Creating the Model

Create the model in CADFEKO. Define any ports and sources required for the model. Specify the operating frequency or frequency range for the model.

  1. Use the model considered in Pin-Fed, SEP Model and rename the file.
  2. Delete the substrate part contained in the antenna part.
  3. Add a planar multilayer substrate (infinite plane) with a conducting layer at the bottom.
    1. Add a Plane / ground.
      • Select Planar multilayer substrate from the drop-down list.
      • Ground plane (Layer 1): PEC
      • Thickness (Layer 1): substrateHeight
      • Medium (Layer 1): substrate