/INIMAP2D
Block Format Keyword Map 2D velocity and thermodynamic values into a 3D axisymmetric space for use with /ALE/EULER materials.
Format
(1)  (2)  (3)  (4)  (5)  (6)  (7)  (8)  (9)  (10) 

/INIMAP2D/form/inimap2d_ID  
inimap2d_title  
node_ID_{1}  node_ID_{2}  node_ID_{3}  
grbric_ID  grquad_ID  grtria_ID  
f2d_ID_{v}  Fscale_{v}  
f2d_ID_{vf1}  f2d_ID_{rho1}  Fscale_{rho1}  f2d_ID_{p_e1}  Fscale_{p_e1}  
etc  etc  etc  etc  etc  
f2d_ID_{vfN}  f2d_ID_{rhoN}  Fscale_{rhoN}  f2d_ID_{p_eN}  Fscale_{p_eN} 
Definitions
Field  Contents  SI Unit Example 

form  Initial state formulation.


inimap2d_ID  Inimap2d block identifier. (Integer, maximum 10 digits) 

inimap2d_title  Inimap2d block title. (Character, maximum 100 characters) 

node_ID_{1}  Node 1 identifier. (Integer, maximum 10 digits) 

node_ID_{2}  Node 2 identifier. (Integer, maximum 10 digits) 

node_ID_{3}  Node 3 identifier. (Integer, maximum 10 digits) 

grbric_ID  Brick group on which initialization is
performed. (Integer) 

grquad_ID  Quad group on which initialization is
performed. (Integer) 

grtria_ID  Tria group on which initialization is performed. (Integer) 

f2d_ID_{v}  Function identifier
(/FUNC_2D) for velocity initialization. (Integer) 

Fscale_{v}  Velocity scale factor. 4 (Integer) 
$\left[\frac{\text{m}}{\text{s}}\right]$ 
Repeat the following lines for each /MAT/LAW151 or /MAT/LAW51 submaterial 1 through N  
f2d_ID_{vf1}  2D function identifier
(/FUNC_2D) for volume fraction
${\mathrm{f}}_{vf}\left(t\right)$
.
(Integer) 

f2d_ID_{rhoi}  2D function identifier
(/FUNC_2D) for density
${\mathrm{f}}_{rho}\left(t\right)$
.
(Integer) 

Fscale_{rhoi}  Density scale factor. 4
(Real) 
$\left[\frac{\text{kg}}{{\text{m}}^{\text{3}}}\right]$ 
f2d_ID_{p_ei}  If
form=VE, 2D function identifier
(/FUNC_2D) for energy
${\mathrm{f}}_{p\_e}\left(t\right)$
. If form=VP, 2D
function identifier (/FUNC_2D) for pressure
${\mathrm{f}}_{p\_e}\left(t\right)$
.
(Integer) 

Fscale_{p_e1}  If
form=VE, Energy scale factor. 4 If form=VP, Pressure scale factor. (Real) 
$\left[\text{Pa}\right]$ or $\left[\frac{\text{J}}{{\text{m}}^{\text{3}}}\right]$ 
Example
/INIMAP2D/VE/1
INIMAP2D1
# node_ID1 node_ID2 node_ID3
130602 131262 96789
#grbric_ID grquad_ID grsh3n_ID
1 0 0
# fct_u
3
# fct_alp fct_rho fct_eint
0 1 0
#12345678910
/FUNC_2D/1
for density initialization
# dim
1
# X Y Z1
# Xcoord YCoord density
0.00000000 0.00000000 109.00000000
0.00195695 0.00000000 114.00000000
0.00391389 0.00000000 111.00000000
0.00587084 0.00000000 109.00000000
0.00782779 0.00000000 114.00000000
#12345678910
/FUNC_2D/3
for velocity initialization
# dim
2
# X Y Z1 Z2
# Xcoord YCoord velocity x velocity y
0.00097656 0.00097656 0.00026680 0.02174114
0.00097656 0.00292969 0.00080037 0.02173459
0.00097656 0.00488281 0.00133382 0.02172149
0.00097656 0.00683594 0.00186707 0.02170185
0.00097656 0.00878906 0.00240003 0.02167567
#12345678910
#enddata
Comments
 node_ID_{1}, node_ID_{2} and node_ID_{3} define the local coordinate system used for mapping.
Where, node_ID_{1} and node_ID_{2} define $X\text{'}$
node_ID_{1} and node_ID_{3} define $Y\text{'}$
 The coordinates of 2D data that will be mapped are defined in the local $X\text{'}$ and $Y\text{'}$ system using the /FUNC_2D X and Y input.
 When mapping scalar quantities such as density, pressure and energy, use /FUNC_2D with dim=1 and define the scalar value using Z1. For vector quantities such as velocity, use /FUNC_2D with dim=2 and define the vector using Z1 and Z2 (Figure 2 and Figure 3).
 If any inputs for veloctiy, volume fraction, density, energy, or pressure are constant, then the function can be left undefined and the constant values can be entered in the scale factor fields, Fscale_{v}, Fscale_{rhoi}, or Fscale_{p_e1}. If functions are defined, then the default value for the scale factors are 1.0.
 When form=VE, the model is initialized from density, specific internal energy and velocity. This formulation is available for all monomaterial ALE / EULER material laws and with material /MAT/LAW151 (MULTIFLUID) and /MAT/LAW51 (MULTIMAT).
 When form=VP, the model is initialized from density, pressure and velocity. This formulation is available for all monomaterial ALE / EULER material laws whose equation of state is provided through the /EOS card and with material /MAT/LAW151 and /MAT/LAW51 only if I_{form}= 12 is used.
 If explosive material LAW5 (JWL) is used as submaterial, then mapping will be proceeded considering all explosive was burnt (burn fraction = 1.0). The mapping will be done with detonation products only with a burn fraction = 1.0.