Flux in SimLab : 2D Examples

Solution Example Description Illustration
2D

Transient Magnetic

Brushless IPM motor

Summary

All files

The studied device, a brushless AC embedded permanent magnet motor presented in the figure in the right, includes the following elements:
  • a fixed part (stator) including yoke, slots, and windings
  • an air gap
  • a movable part (rotor) with embedded magnets


2D

Transient Magnetic

Brushless SPM motor

Summary

All files

The studied device, a brushless DC motor with surface permanent magnet, includes the following elements:

  • a fixed part (stator) including yoke, slots, and windings
  • an air gap
  • a movable part (rotor) with surfaced magnets


2D Transient Magnetic

Multi-physics (EM, NVH, CFD) Analysis of a 75 kW PMSM - Motor Mode

Summary

All files

The studied device, a 75-kW permanent magnet synchronous machine, is running in motor mode. As presented in the figure in the right, it includes the following elements:
  • a fixed part (stator) including yoke, slots, and windings
  • an air gap
  • a movable part (rotor) with surfaced magnets
After the 2D transient magnetic is finished, the post-processing results, such as stator tooth electromagnetic forces and loss distribution can be used for further NVH (nodal force method) and CFD (global value + nodal mapping) analysis.
2D Transient Magnetic

EM-CFD Coupling Analysis of a 75 kW PMSM (Air Cooling) - Generator Mode

Summary

All files

The studied device, a 75-kW permanent magnet synchronous machine, is running in generator mode. As presented in the figure in the right, it includes the following elements:
  • a fixed part (stator) including yoke, and adaptive slot region for CFD coupling analysis
  • an air gap
  • a movable part (rotor) with surfaced magnets
After the 2D transient magnetic is finished, loss distribution can be used for further CFD analysis (realized by nodal mapping method).
Note: Several tutorials are also available on SimLab Learning Center.