SnRD Pre - Model Preparation

The steps to launch Static loadcase workflow are explained below.
  1. Launch HyperMesh Desktop 2022.3 from the installed location.
    HyperMesh Desktop 2022.3 opens and the user interface displays, as shown below.


    Figure 1.
  2. Click Directors > SNRD.


    Figure 2.
  3. All of the pre-processing tasks are loaded and display in the SNR-Pre tab.


    Figure 3.
    The next step in the process is to define the Process Parameters.
  4. Click Static in the tab to view the static load case definition tasks.


    Figure 4.

You can refer to Process Parameters - Importing Files through to Material Mapping section under SnRD Pre - Model Preparation for Risk and Root Cause (Dynamic) Analysis workflow.