The advantages of choosing topology optimization are as follows:
OptiStruct's design-synthesis technology uses the topology
optimization approach to generate innovative concept design proposals. OptiStruct generates an optimal design proposal for the connectors
layout of the design based on user-defined design space and design targets.
In SnRD Modal Frequency Response analysis is used as the optimization load case with an
objective of minimizing the modal relative displacement across the selected E-Line.
SnRD Optimization module, automatically converts the time domain excitations to
frequency domain for creating the MFREQ loadcase. Amplitude and phase are considered.
The design variable for Topology optimization is the CBAR element connecting the Master
and Slave components.
Optimization can be done for the response at single frequency or for a band of
frequencies.
The work flow of the Systematic Issue is illustrated below: Figure 1.
Optimization Deck setup
Once the optimization deck setup is initiateed, following changes are done to the solver deck:
Load case setup : Modal Transient (MTRAN) analysis is changed to Modal Frequency Response
(MFREQ)
Optimization parameters set-up: Responses and Constraints
Note: Frequency range selection
table will be empty for a Static Load case setup work flow.
Optimization Deck setup process
Steps involved in setting up Optimization deck are given below:
Select interface with Squeak and/or Rattle issue.
Load the interface to understand the critical frequencies Figure 2.
Select direction for Optimization.
Note: This selection must be based on the information shown in the Relative Displacement
or Line graph.
Identify frequency or frequencies to optimize.
Select the Auto Fill option to automatically fill the frequency (Top Contributing mode
from RMC Bar Chart) or frequencies of selected modes.
Steps to export solver deck are given below:
Click the file browser icon for Choose Directory option.
