CableSchematicPort

A cable port component.

Example

app = cf.GetApplication()
project = app:OpenFile(FEKO_HOME..[[/shared/Resources/Automation/Cables.cfx]])

    -- Add a voltageSource with a magnitude of 1, 50 Ohm impedance and zero phase

cableHarness = project.Cables.Harnesses["CableHarness1"]
terminal1 = cableHarness.Connectors["CableConnector1"].Pins["Pin2"].Terminal
terminal2 = cableHarness.Connectors["CableConnector2"].Pins["Pin1"].Terminal
Port2 = project.Ports:AddCablePort(cableHarness, terminal1, terminal2)
StandardConfiguration1 = project.SolutionConfigurations["StandardConfiguration1"]
VoltageSource1 = StandardConfiguration1.Sources:AddVoltageSource(Port2)

app.Schematics:ShowCableSchematic(cableHarness)
cablePortSymbol = app.Schematics[1].Symbols:Item(Port2.Label)
cablePortSymbol:Rotate()

Inheritance

The CableSchematicPort object is derived from the CableSchematicComponent object.

Property List

Label
The object label. (Read/Write string)
Position
The schematic symbol position. (Read only SchematicSymbolPosition)
Type
The object type string. (Read only string)

Collection List

Terminals
The collection of schematic terminals on the symbol. (TerminalCollection of Terminal.)

Method List

Delete ()
Deletes the component from the cable schematic.
GetProperties ()
Returns a table of properties representing the state of the object. The properties table can be used with the SetProperties method to change multiple properties of the object in one step. (Returns a table object.)
Rotate ()
Rotates the symbol 90 degrees clockwise.
SetProperties (properties table)
Modifies the state of the object using the provided table of properties. This method is used to modify multiple properties of the object in a single step.

Static Function List

GetDefaultProperties ()
Creates a table containing the default settings to create an object. (Returns a table object.)

Property Details

Label
The object label.
Type
string
Access
Read/Write
Position
The schematic symbol position.
Type
SchematicSymbolPosition
Access
Read only
Type
The object type string.
Type
string
Access
Read only

Collection Details

Terminals
The collection of schematic terminals on the symbol.
Type
TerminalCollection

Method Details

Delete ()
Deletes the component from the cable schematic.
GetProperties ()
Returns a table of properties representing the state of the object. The properties table can be used with the SetProperties method to change multiple properties of the object in one step.
Return
table
A properties table.
Rotate ()
Rotates the symbol 90 degrees clockwise.
SetProperties (properties table)
Modifies the state of the object using the provided table of properties. This method is used to modify multiple properties of the object in a single step.
Input Parameters
properties(table)
A table of properties defining the new state of the object.

Static Function Details

GetDefaultProperties ()
Creates a table containing the default settings to create an object.
Return
table
The default properties table.