FillHoleSettings
A settings object for filling a geometry hole.
Example
app = cf.GetApplication() project = app:NewProject() -- Get the settings for filling a geometry hole fillHoleSettings = project.Geometry.Rebuild.FillHoleSettings -- Enable smooth internal edges when filling a geometry hole fillHoleSettings.SmoothInternalEdgesEnabled = true -- Restore the default settings for 'FillHoleSettings' fillHoleSettings:RestoreDefaults()
Inheritance
The FillHoleSettings object is derived from the RepairSettings object.
Usage locations (object properties)
The following objects have properties using the FillHoleSettings object:
Property List
- HoleBoundaryTransition
- Specifies the hole boundary transition from the hole boundary faces to the hole fill faces. (Read/Write FillHoleBoundaryTransitionTypeEnum)
- PatchTopology
- The topology surface options for the patch filling the hole. (Read/Write FillHolePatchTopologyTypeEnum)
- SmoothInternalEdgesEnabled
- If this option is selected, the internal edges of the faces used to fill the hole will be smooth and without discontinuities. (Read/Write boolean)
- Type
- The object type string. (Read only string)
Method List
- GetProperties ()
- Returns a table of properties representing the state of the object. The properties table can be used with the SetProperties method to change multiple properties of the object in one step. (Returns a table object.)
- RestoreDefaults ()
- Restores all the settings to their default values.
- SetProperties (properties table)
- Modifies the state of the object using the provided table of properties. This method is used to modify multiple properties of the object in a single step.
Property Details
- HoleBoundaryTransition
- Specifies the hole boundary transition from the hole boundary faces to the hole fill faces.
- Type
- FillHoleBoundaryTransitionTypeEnum
- Access
- Read/Write
- PatchTopology
- The topology surface options for the patch filling the hole.
- Type
- FillHolePatchTopologyTypeEnum
- Access
- Read/Write
- SmoothInternalEdgesEnabled
- If this option is selected, the internal edges of the faces used to fill the hole will be smooth and without discontinuities.
- Type
- boolean
- Access
- Read/Write
- Type
- The object type string.
- Type
- string
- Access
- Read only
Method Details
- GetProperties ()
- Returns a table of properties representing the state of the object. The properties table can be used with the SetProperties method to change multiple properties of the object in one step.
- Return
- table
- A properties table.
- RestoreDefaults ()
- Restores all the settings to their default values.
- SetProperties (properties table)
- Modifies the state of the object using the provided table of properties. This method is used to modify multiple properties of the object in a single step.
- Input Parameters
- properties(table)
- A table of properties defining the new state of the object.