CableSchematicVoltageProbe

A cable voltage probe component.

Example

app = cf.GetApplication()
project = app:OpenFile(FEKO_HOME..[[/shared/Resources/Automation/Cables.cfx]])

    -- Add a 'CableSchematicVoltageProbe'
    
cableHarness = project.Cables.Harnesses["CableHarness1"]
terminal1 = cableHarness.Connectors["CableConnector2"].Pins["Pin2"].Terminal
terminal2 = cableHarness.Connectors["CableConnector2"].Pins["Pin1"].Terminal
voltageProbe = cableHarness.SchematicComponents:AddVoltageProbe(terminal1, terminal2)

    -- Get the terminals that the 'CableSchematicVoltageProbe' is connected to

terminalList = cableHarness.SchematicComponents["P1"].Terminals

Inheritance

The CableSchematicVoltageProbe object is derived from the CableSchematicComponent object.

Property List

Label
The object label. (Read/Write string)
Position
The schematic symbol position. (Read only SchematicSymbolPosition)
Type
The object type string. (Read only string)

Collection List

Terminals
The collection of schematic terminals on the symbol. (TerminalCollection of Terminal.)

Method List

Delete ()
Deletes the component from the cable schematic.
Rotate ()
Rotates the symbol 90 degrees clockwise.

Static Function List

GetDefaultProperties ()
Creates a table containing the default settings to create an object. (Returns a table object.)

Property Details

Label
The object label.
Type
string
Access
Read/Write
Position
The schematic symbol position.
Type
SchematicSymbolPosition
Access
Read only
Type
The object type string.
Type
string
Access
Read only

Collection Details

Terminals
The collection of schematic terminals on the symbol.
Type
TerminalCollection

Method Details

Delete ()
Deletes the component from the cable schematic.
Rotate ()
Rotates the symbol 90 degrees clockwise.

Static Function Details

GetDefaultProperties ()
Creates a table containing the default settings to create an object.
Return
table
The default properties table.