CableInstance
A cable instance.
Example
app = cf.GetApplication() project = app:OpenFile(FEKO_HOME..[[/shared/Resources/Automation/Cables.cfx]]) -- Get an existing 'CableHarness' cableHarness = project.Cables.Harnesses["CableHarness1"] -- Get a 'CableInstance' cableInstance = cableHarness.CableInstances["Cable1"]
Property List
- AvailableRoutes
- The available cable path routes between the source and destination connectors. (Read only List of CableRoute)
- CrossSection
- The cable cross section type for the cable. (Read/Write CableCrossSection)
- DestinationConnector
- The destination connector where the cable ends. (Read/Write CableConnector)
- Included
- True if the cable should be included in the cable harness solution. (Read/Write boolean)
- Label
- The object label. (Read/Write string)
- Route
- The route the cable follows. Setting this property will adjust the ShortestRouteEnabled property to false. (Read/Write CableRoute)
- ShortestRouteEnabled
- True is the shortest cable route must be used. (Read/Write boolean)
- SourceConnector
- The source connector where the cable starts. (Read/Write CableConnector)
- Type
- The object type string. (Read only string)
Collection List
- Signals
- The cable signal settings. (CableSignalSettingsCollection of CableSignalSettings.)
Method List
- Delete ()
- Deletes the cable from the cable harness.
- GetProperties ()
- Returns a table of properties representing the state of the object. The properties table can be used with the SetProperties method to change multiple properties of the object in one step. (Returns a table object.)
- SetProperties (properties table)
- Modifies the state of the object using the provided table of properties. This method is used to modify multiple properties of the object in a single step.
Static Function List
- GetDefaultProperties ()
- Creates a table containing the default settings to create an object. (Returns a table object.)
Property Details
- AvailableRoutes
- The available cable path routes between the source and destination connectors.
- Access
- Read only
- CrossSection
- The cable cross section type for the cable.
- Type
- CableCrossSection
- Access
- Read/Write
- DestinationConnector
- The destination connector where the cable ends.
- Type
- CableConnector
- Access
- Read/Write
- Included
- True if the cable should be included in the cable harness solution.
- Type
- boolean
- Access
- Read/Write
- Label
- The object label.
- Type
- string
- Access
- Read/Write
- Route
- The route the cable follows. Setting this property will adjust the ShortestRouteEnabled property to false.
- Type
- CableRoute
- Access
- Read/Write
- ShortestRouteEnabled
- True is the shortest cable route must be used.
- Type
- boolean
- Access
- Read/Write
- SourceConnector
- The source connector where the cable starts.
- Type
- CableConnector
- Access
- Read/Write
- Type
- The object type string.
- Type
- string
- Access
- Read only
Collection Details
- Signals
- The cable signal settings.
Method Details
- Delete ()
- Deletes the cable from the cable harness.
- GetProperties ()
- Returns a table of properties representing the state of the object. The properties table can be used with the SetProperties method to change multiple properties of the object in one step.
- Return
- table
- A properties table.
- SetProperties (properties table)
- Modifies the state of the object using the provided table of properties. This method is used to modify multiple properties of the object in a single step.
- Input Parameters
- properties(table)
- A table of properties defining the new state of the object.
Static Function Details
- GetDefaultProperties ()
- Creates a table containing the default settings to create an object.
- Return
- table
- The default properties table.