LoadSmithQuantity
The Smith load quantity properties.
Example
app = pf.GetApplication() app:NewProject() app:OpenFile(FEKO_HOME..[[/shared/Resources/Automation/Dipole_Example.fek]]) -- Create a Smith charts with a load trace graph = app.SmithCharts:Add() complexLoadTrace = graph.Traces:Add(app.Models[1].Configurations[1].Loads["ComplexLoad"]) -- Configure the trace quantity complexLoadTrace.Quantity.PhaseAdditionEnabled = true complexLoadTrace.Quantity.Phase = 50
Usage locations
The LoadSmithQuantity object can be accessed from the following locations:
- Properties
- LoadSmithTrace object has property Quantity.
Property List
- LoadExpression
- The load value to use. The value is a complex expression, e.g. “50+j*0”. (Read/Write Expression)
- LoadSubtractionEnabled
- Specifies whether the loading value must be subtracted before plotting. (Read/Write boolean)
- Phase
- The phase to be added to the trace. The value is in degrees [-360,360]. (Read/Write number)
- PhaseAdditionEnabled
- Enable phase addition for the trace. (Read/Write boolean)
- ReferenceImpedanceExpression
- The reference impedance value to use. The value is a complex expression, e.g. “50+j*0”. (Read/Write Expression)
- UseCustomReferenceImpedance
- Specifies whether a custom reference impedance should be used. (Read/Write boolean)
Property Details
- LoadExpression
- The load value to use. The value is a complex expression, e.g. “50+j*0”.
- Type
- Expression
- Access
- Read/Write
- LoadSubtractionEnabled
- Specifies whether the loading value must be subtracted before plotting.
- Type
- boolean
- Access
- Read/Write
- Phase
- The phase to be added to the trace. The value is in degrees [-360,360].
- Type
- number
- Access
- Read/Write
- PhaseAdditionEnabled
- Enable phase addition for the trace.
- Type
- boolean
- Access
- Read/Write
- ReferenceImpedanceExpression
- The reference impedance value to use. The value is a complex expression, e.g. “50+j*0”.
- Type
- Expression
- Access
- Read/Write
- UseCustomReferenceImpedance
- Specifies whether a custom reference impedance should be used.
- Type
- boolean
- Access
- Read/Write