*DeleteUC

Deletes connector/attachment control for a given page, engineering, and control name in control manager.

Syntax

*DeleteUC page_name engineering_name control_name

HyperMesh Tcl Modify Command

Deletes connector/attachment control for a given page, engineering, and control name in control manager.

page_name: Control manager page name. Valid values are Point, Fastener, Line, Area, Attachments, and Connect Attachments.
engineering_name: Engineering name.
control_name: Attachment/Connector control name

To perform deletion of connector control from page name “Point”, engineering name “Spot Weld” and control name “connectorcontrol1”:

*DeleteUC "Point" "Spot Weld" "connectorcontrol1"

To perform deletion of attachment control from page name “Attachments”, engineering name “Bolt,” and control name “attachmentcontrol1”:

*DeleteUC "Attachments" " Bolt" "attachmentcontrol1"

Incorrect usage results in a Tcl error. To detect errors, you can use the catch command:

if { [ catch {command_name...} ] } {
   # Handle error
}

2021.1