Required Hardware Configuration
This section presents the hardware configurations required for Flux 2021.2 2D, Skew, 3D and PEEC.
Processor
The processors required to run Flux 2D, Skew, 3D and PEEC
should have the following characteristics:
| Element | Characteristics |
|---|---|
| Processor |
|
Minimum configuration (hard disk and RAM)
The minimum configuration required to run Flux 2D, Skew, 3D
and PEEC are:
| 2D | Skew/3D | PEEC | |
|---|---|---|---|
| Hard disk | 250 GiB | 500 GiB | 50 GiB |
| RAM | 8 GiB | 16 GiB | 16 GiB |
Recommended configuration (hard disk and RAM)
The recommended configuration required to run Flux 2D, Skew,
3D and PEEC are:
| 2D | Skew/3D | PEEC | |
|---|---|---|---|
| Hard disk | 500 GiB | 1 TiB | 100 GiB |
| RAM | 16 GiB | 64 GiB | 64 GiB |
Graphic card
The graphic cards required to run Flux 2D, Skew, 3D and PEEC should have the following characteristics:
| Element | Characteristics |
|---|---|
| Graphic card |
|
Flux uses the OPENGL V2.0 graphic technology. This technology provides improved rendering and smoother motion when moving objects.
This technology requires:
- the use of a graphic card compatible with OPENGL V2.0
- the latest version of the graphic card driver supplied by the manufacturer
A summary of the conditions of use is presented in the table below:
| Conditions of use |
|---|
Installation of a graphic card compatible with OPENGL
V2.0:
|
Installation of the latest version of the card driver
|
警告: The use of graphic chipsets with shared memory is not
recommended.
It is preferable to use graphic chipsets with dedicated memory.