Source Data
View the quantities that are available for voltage, current and waveguide sources as well as FEM modal ports.
On the Home tab, in the
Add results group, click the 
Source data icon.
| Quantity | Voltage and Current sources | Waveguide sources and FEM modal ports |
|---|---|---|
| Impedance |  |
|
| Admittance | |
|
| Voltage | |
|
| Current | |
|
| Reflection coefficient | |
|
| VSWR | |
|
| SWR | |
|
| Source power | |
|
| Power loss due to mismatch | |
|
| Mismatch loss | |
|
Note: The quantities listed are only available for sources on ports. For ideal sources, such as
plane waves and electric dipoles, or equivalent sources such as far field and near field
sources, source data is not available since these sources are, per definition, not connected
to any geometry.