`NearFieldCollection`

A collection of solution near fields for this solution configuration.

## Example

application = cf.Application.GetInstance() project = application:NewProject()-- Add a near field request to the near field collectionconfiguration = project.Contents.SolutionConfigurations[1] nearFieldCollection = configuration.NearFields nearFieldRequest = nearFieldCollection:AddCartesian(0,0,0,1,1,1,3,3,3)-- Remove the near field request from the near field collectionnearFieldCollection:Item(nearFieldRequest.Label):Delete()

## Inheritance

The NearFieldCollection object is derived from the AbstractModifiableCollection object.

## Usage locations

The NearFieldCollection object can be accessed from the following locations:

- Collection lists
- CharacteristicModesConfiguration object has collection NearFields.
- StandardConfiguration object has collection NearFields.

## Property List

## Method List

- Add (
`properties`table) - Create a near field using the table of properties. (Returns a NearField object.)
- AddCartesian (
`startx`Expression,`starty`Expression,`startz`Expression,`endx`Expression,`endy`Expression,`endz`Expression,`numx`Expression,`numy`Expression,`numz`Expression) - Create a near field calculation request using the Cartesian coordinate system. (Returns a NearField object.)
- AddCartesianBoundary (
`startx`Expression,`starty`Expression,`startz`Expression,`endx`Expression,`endy`Expression,`endz`Expression,`numx`Expression,`numy`Expression,`numz`Expression) - Create a near field calculation request using the Cartesian boundary definition method. (Returns a NearField object.)
- AddConical (
`startrho`Expression,`startphi`Expression,`startz`Expression,`endrho`Expression,`endphi`Expression,`endz`Expression,`numphi`Expression,`numz`Expression) - Create a near field calculation request using the conical coordinate system. (Returns a NearField object.)
- AddCylindrical (
`startrho`Expression,`startphi`Expression,`startz`Expression,`endrho`Expression,`endphi`Expression,`endz`Expression,`numrho`Expression,`numphi`Expression,`numz`Expression) - Create a near field calculation request using the cylindrical coordinate system. (Returns a NearField object.)
- AddCylindricalX (
`startrho`Expression,`startphi`Expression,`startx`Expression,`endrho`Expression,`endphi`Expression,`endx`Expression,`numrho`Expression,`numphi`Expression,`numx`Expression) - Create a near field calculation request using the cylindrical (X axis) coordinate system. (Returns a NearField object.)
- AddCylindricalY (
`startrho`Expression,`startphi`Expression,`starty`Expression,`endrho`Expression,`endphi`Expression,`endy`Expression,`numrho`Expression,`numphi`Expression,`numy`Expression) - Create a near field calculation request using the cylindrical (Y axis) coordinate system. (Returns a NearField object.)
- AddSpecifiedPoints (
`points`List of Point) - Create a near field calculation request using specified points. (Returns a NearField object.)
- AddSpherical (
`startradius`Expression,`starttheta`Expression,`startphi`Expression,`endradius`Expression,`endtheta`Expression,`endphi`Expression,`numradius`Expression,`numtheta`Expression,`numphi`Expression) - Create a near field calculation request using the spherical coordinate system. (Returns a NearField object.)
- Delete ()
- Deletes the entity.
- Duplicate ()
- Duplicates the entity. (Returns a Object object.)
- GetProperties ()
- Returns a table of properties representing the state of the object. The properties table can be used with the SetProperties method to change multiple properties of the object in one step. (Returns a table object.)
- Item (
`index`number) - Returns the NearField for the given index in the collection. (Returns a NearField object.)
- Item (
`label`string) - Returns the NearField for the given label in the collection. (Returns a NearField object.)
- Items ()
- Returns a table of NearField items. (Returns a UnsupportedType(List of NearField) object.)
- SetProperties (
`properties`Object) - Modifies the state of the object using the provided table of properties. This method is used to modify multiple properties of the object in a single step.

## Static Function List

- GetDefaultProperties ()
- Creates a table containing the default settings to create an object. (Returns a table object.)

## Property Details

## Method Details

- Add (
`properties`table) - Create a near field using the table of properties.
- AddCartesian (
`startx`Expression,`starty`Expression,`startz`Expression,`endx`Expression,`endy`Expression,`endz`Expression,`numx`Expression,`numy`Expression,`numz`Expression) - Create a near field calculation request using the Cartesian coordinate system.
- Input Parameters
`startx`(Expression)- The X axis start point.
`starty`(Expression)- The Y axis start point.
`startz`(Expression)- The Z axis start point.
`endx`(Expression)- The X axis end point.
`endy`(Expression)- The Y axis end point.
`endz`(Expression)- The Z axis end point.
`numx`(Expression)- The X axis number of points.
`numy`(Expression)- The Y axis number of points.
`numz`(Expression)- The Z axis number of points.

- Return
- NearField
- The near field.

- AddCartesianBoundary (
`startx`Expression,`starty`Expression,`startz`Expression,`endx`Expression,`endy`Expression,`endz`Expression,`numx`Expression,`numy`Expression,`numz`Expression) - Create a near field calculation request using the Cartesian boundary definition method.
- Input Parameters
`startx`(Expression)- The X axis number of points.
`starty`(Expression)- The Y axis number of points.
`startz`(Expression)- The Z axis number of points.
`endx`(Expression)- The X axis end point.
`endy`(Expression)- The Y axis end point.
`endz`(Expression)- The Z axis end point.
`numx`(Expression)- The X axis number of points.
`numy`(Expression)- The Y axis number of points.
`numz`(Expression)- The Z axis number of points.

- Return
- NearField
- The near field.

- AddConical (
`startrho`Expression,`startphi`Expression,`startz`Expression,`endrho`Expression,`endphi`Expression,`endz`Expression,`numphi`Expression,`numz`Expression) - Create a near field calculation request using the conical coordinate system.
- Input Parameters
`startrho`(Expression)- The Rho axis start point.
`startphi`(Expression)- The Phi axis start point (degrees).
`startz`(Expression)- The Z axis start point.
`endrho`(Expression)- The Rho axis end point.
`endphi`(Expression)- The Phi axis end point (degrees).
`endz`(Expression)- The Z axis end point.
`numphi`(Expression)- The Phi axis number of points.
`numz`(Expression)- The Z axis number of points.

- Return
- NearField
- The near field.

- AddCylindrical (
`startrho`Expression,`startphi`Expression,`startz`Expression,`endrho`Expression,`endphi`Expression,`endz`Expression,`numrho`Expression,`numphi`Expression,`numz`Expression) - Create a near field calculation request using the cylindrical coordinate system.
- Input Parameters
`startrho`(Expression)- The Rho axis start point.
`startphi`(Expression)- The Phi axis start point (degrees).
`startz`(Expression)- The Z axis start point.
`endrho`(Expression)- The Rho axis end point.
`endphi`(Expression)- The Phi axis end point (degrees).
`endz`(Expression)- The Z axis end point.
`numrho`(Expression)- The Rho axis number of points.
`numphi`(Expression)- The Phi axis number of points.
`numz`(Expression)- The Z axis number of points.

- Return
- NearField
- The near field.

- AddCylindricalX (
`startrho`Expression,`startphi`Expression,`startx`Expression,`endrho`Expression,`endphi`Expression,`endx`Expression,`numrho`Expression,`numphi`Expression,`numx`Expression) - Create a near field calculation request using the cylindrical (X axis) coordinate system.
- Input Parameters
`startrho`(Expression)- The Rho axis start point.
`startphi`(Expression)- The Phi axis start point (degrees).
`startx`(Expression)- The X axis start point.
`endrho`(Expression)- The Rho axis end point.
`endphi`(Expression)- The Phi axis end point (degrees).
`endx`(Expression)- The X axis end point.
`numrho`(Expression)- The Rho axis number of points.
`numphi`(Expression)- The Phi axis number of points.
`numx`(Expression)- The X axis number of points.

- Return
- NearField
- The near field.

- AddCylindricalY (
`startrho`Expression,`startphi`Expression,`starty`Expression,`endrho`Expression,`endphi`Expression,`endy`Expression,`numrho`Expression,`numphi`Expression,`numy`Expression) - Create a near field calculation request using the cylindrical (Y axis) coordinate system.
- Input Parameters
`startrho`(Expression)- The Rho axis start point.
`startphi`(Expression)- The Phi axis start point (degrees).
`starty`(Expression)- The Y axis start point.
`endrho`(Expression)- The Rho axis end point.
`endphi`(Expression)- The Phi axis end point (degrees).
`endy`(Expression)- The Y axis end point.
`numrho`(Expression)- The Rho axis number of points.
`numphi`(Expression)- The Phi axis number of points.
`numy`(Expression)- The Y axis number of points.

- Return
- NearField
- The near field.

- AddSpecifiedPoints (
`points`List of Point) - Create a near field calculation request using specified points.
- AddSpherical (
`startradius`Expression,`starttheta`Expression,`startphi`Expression,`endradius`Expression,`endtheta`Expression,`endphi`Expression,`numradius`Expression,`numtheta`Expression,`numphi`Expression) - Create a near field calculation request using the spherical coordinate system.
- Input Parameters
`startradius`(Expression)- The radius start point.
`starttheta`(Expression)- The Theta axis start point (degrees).
`startphi`(Expression)- The Phi axis start point (degrees).
`endradius`(Expression)- The radius end point.
`endtheta`(Expression)- The Theta axis end point (degrees).
`endphi`(Expression)- The Phi axis end point (degrees).
`numradius`(Expression)- The radius number of points.
`numtheta`(Expression)- The Theta axis number of points.
`numphi`(Expression)- The Phi axis number of points.

- Return
- NearField
- The near field.

- Delete ()
- Deletes the entity.
- Duplicate ()
- Duplicates the entity.
- Return
- Object
- The new (duplicated) entity.

- GetProperties ()
- Returns a table of properties representing the state of the object. The properties table can be used with the SetProperties method to change multiple properties of the object in one step.
- Return
- table
- A table defining the properties.

- Item (
`index`number) - Returns the NearField for the given index in the collection.
- Item (
`label`string) - Returns the NearField for the given label in the collection.
- Items ()
- Returns a table of NearField items.
- Return
- UnsupportedType(List of NearField)
- The list of items in the collection

- SetProperties (
`properties`Object) - Modifies the state of the object using the provided table of properties. This method is used to modify multiple properties of the object in a single step.
- Input Parameters
`properties`(Object)- A table of properties defining the new state of the object.

## Static Function Details

- GetDefaultProperties ()
- Creates a table containing the default settings to create an object.
- Return
- table
- A table containing the default properties.