2022.1

Home
Geometry
Create, edit, and cleanup geometry.
Edit Geometry
Explore the tools used to edit geometry.
Split Surfaces and Solids
Use the Split tools to create fixed points and split surfaces or solids using a variety of methods.

What's New
Get Started
Learning Center
Manage Files and Data
Model Build and Assembly
Sketching
Geometry
Flow
Radiation
Motion
Meshing
Solution
Manage Automation Templates
Post-Processing
AcuSolve Help

2022.1

What's New
View new features for HyperWorks CFD 2022.1.
Get Started
Learn the basics and discover the workspace.
Learning Center
Discover HyperWorks CFD functionality with interactive tutorials and community resources.
Manage Files and Data
Create, open, import, and save models.
Model Build and Assembly
Create, organize and manage parts and subsystems.
Sketching
Create and edit 2D parametric sketch geometry.
Geometry
Create, edit, and cleanup geometry.
- Manage FE Geometry
  Convert b-spline models to discrete models then clean up the geometry and mesh.
- Repair Geometry
  Review geometric errors in the model's surfaces and solids and fix any defects.
- Create Geometry
  Explore the tools used to create geometry.
- Edit Geometry
  Explore the tools used to edit geometry.
  - Split Surfaces and Solids
    Use the Split tools to create fixed points and split surfaces or solids using a variety of methods.
    - Split Interactive
      Use the Split: Interactive tool to quickly create fixed points on surfaces and edges, and split surfaces with lines. You can also remove fixed points from surfaces or surface edges to unsplit them.
    - Split with Nodes
      Use the Split: Nodes tool to split surfaces using ordered (node list/path) and non-ordered node selections.
    - Split with Lines
      Use the Split: Lines tool to split surfaces and solids using lines, bounding lines, offset lines, and graphical lines.
    - Split with Surfaces
      Use the Split: Surfaces tool to split surfaces and solids using surfaces.
    - Split with Planes
      Use the Split: Planes tool to split lines, surfaces, or solids.
    - Perform Parametric Trimming
      Use the Split: Parametric tool to restore suppressed fixed points.
    - Split by Curvature
      Split surfaces based on curvature or angle.
  - Stitch Surfaces and Suppress Edges
    Use the Stitch tool to stitch and unstitch adjacent or overlapping surfaces, and suppress or unsuppress edges.
  - Imprint Geometry
    Use the Imprint tool to imprint geometry onto target surfaces or lines, thus creating new fixed points or edges.
  - Drag and Spin
    Use the Drag/Spin tool to push or pull surfaces and spin lines and surfaces in order to creates surfaces or solids.
  - Combine, Subtract, Intersect Solids
    Use the Boolean tool to combine solids, subtract one solid from another, and find the intersection out of the solids.
  - Disconnect Solids
    Separate solids that are connected at a shared interface.
  - Find and Fill Cavities
    Use the Plug tool to find and fill cavities. The Plug tool can also be used to remove protrusions, holes, and complex features.
  - Scale Parts
    Use the Scale tool to resize geometry in your model.
  - Mirror Entities
    Use the Mirror tool to mirror/reflect selected entities across a symmetry plane.
  - Fuse 2D Shell Meshes
    Use the Fuse tool to connect discrete topology surfaces/solids/parts. The Fuse tool can be utilized to connect close proximity inputs by defining a threshold.
  - Merge Solids or Surfaces
    Merge two or more solids or surfaces. Solids are merged by removing shared faces while surfaces are merged by suppressing shared edges.
- Geometry Cleanup
  Clean up problematic areas on geometry.
- Find and Isolate Specific Geometry Types
  When performing cleanup or defining simulation parameters, it can be helpful to first find and isolate certain types of geometry. This will give you a better idea of the areas in the model you need to focus on.
Flow
Set up the simulation model, materials, domains, and boundaries.
Radiation
Define radiation conditions and create emissivity models.
Motion
Define direct, derived, and constrained mesh motion.
Meshing
Generate surface/volume mesh by defining mesh controls, or interactively create and edit 2D surface mesh.
Solution
Define output conditions, run the simulation, and view the results.
Manage Automation Templates
Use the Template Manager to define rule-based logic for groups, geometric operations, and setup and automate simulation processes.
Post-Processing
Post-process the simulation results by creating visualizations and measurements.
AcuSolve Help
Click here to access AcuSolve online help.

View All Altair Simulation Help

2022.1

Home
Geometry
Create, edit, and cleanup geometry.
Edit Geometry
Explore the tools used to edit geometry.
Split Surfaces and Solids
Use the Split tools to create fixed points and split surfaces or solids using a variety of methods.

What's New
Get Started
Learning Center
Manage Files and Data
Model Build and Assembly
Sketching
Geometry
Flow
Radiation
Motion
Meshing
Solution
Manage Automation Templates
Post-Processing
AcuSolve Help

Split Surfaces and Solids

Use the Split tools to create fixed points and split surfaces or solids using a variety of methods.

Split Interactive
Use the Split: Interactive tool to quickly create fixed points on surfaces and edges, and split surfaces with lines. You can also remove fixed points from surfaces or surface edges to unsplit them.
Split with Nodes
Use the Split: Nodes tool to split surfaces using ordered (node list/path) and non-ordered node selections.
Split with Lines
Use the Split: Lines tool to split surfaces and solids using lines, bounding lines, offset lines, and graphical lines.
Split with Surfaces
Use the Split: Surfaces tool to split surfaces and solids using surfaces.
Split with Planes
Use the Split: Planes tool to split lines, surfaces, or solids.
Perform Parametric Trimming
Use the Split: Parametric tool to restore suppressed fixed points.
Split by Curvature
Split surfaces based on curvature or angle.

© 2022 Altair Engineering, Inc. All Rights Reserved.

Intellectual Property Rights Notice | Technical Support