Editing Mesh

It is not possible to edit a simulation mesh directly, but you can unlink the simulation mesh and edit the mesh part as though it is an imported mesh.

  1. Select the geometry part or mesh part in the model tree (the part should have a simulation mesh).
  2. Unlink the simulation mesh using one of the following workflows:
    • From the right-click context menu, click Unlink mesh.
    • On the Mesh tab, in the Simulation mesh group, click the  Unlink mesh icon.
  3. From the drop-down list, select one of the following unlink methods:
    • To unlink the mesh and use new ports, click  and use new ports.
    • To unlink the mesh and use existing ports, click  and use existing ports.
You can now edit the mesh and remesh to obtain a new simulation mesh or use the model mesh as the simulation mesh directly.