2022
Set up your model for analysis.
Use the Output tool to create ouptut controls.
View new features for Virtual Wind Tunnel for ultraFluidX 2022.
Learn the basics and discover the workspace.
Discover Virtual Wind Tunnel for ultraFluidX functionality with interactive tutorials.
Create, open, import, and save models.
Create and modify sketch curves, PolyNURBS, surfaces, and solids.
Manage the parts and assemblies that make up your model.
Use the Systems tool to define local coordinate systems and translate the parts needed to align the model.
Use the Edit Tunnel tool to define the size of the wind tunnel.
Use the Turbulence tool to generate turbulence source regions.
Use the Move tool to position the car inside of the wind tunnel.
Use the Identify Parts tool to define types of parts like wheels, heat exchangers or body panels, which require specific modeling techniques for the CFD run.
Use the Ride Height tool to adjust the heave, pitch, and roll of the model.
Baffles are used to model very thin walls, for example sheet metal parts. In the numerical surface mesh model, baffles are represented by shell elements, which have fluid volume on both sides.
Use the Normals tool to identify and correct the surface normal directions on parts.
Use the Mesh Controls tool to define regions with a user-defined volume element size.
Use the Material tool to define a fluid material for the wind tunnel.
Use the Belt System tool to model a belt system.
Use the General Output tool to define settings for output controls.
Use the Probes tool to define surface probes.
Use the Probes tool to create probes based on a polyline.
Use the Probes tool to define volume probes.
Use the Probes tool to create probes from a rake.
Use the Section cut tool to select planes on which you would like to export the volume variables at given intervals.
Use the Surface tool to define surfaces on which you would like to export results at specific intervals.
Use the Monitor Surface Outputs tool to create an output surface that is not part of the geometry.
Use the Volume tool to define boxes within which the results on all voxels will be written to disk at specified intervals.
Use the Output table tool to import, export, and edit output controls.
Submit jobs and view reports.
This section documents the usage of some of the utility scripts that are provided with Virtual Wind Tunnel.
Explore the best practices for ultraFluidX.
Explore the command line options and input file syntax for ultraFluidX.