Magnetic Properties

Specify the magnetic properties of the dielectric medium.

  1. Click the Magnetic modelling tab.
  2. Specify the magnetic properties of the dielectric.
    • To create a non-magnetic dielectric, from the Definition method drop-down list select Non magnetic.
    • To create a dielectric with frequency-independent-magnetic-properties, from Definition method drop-down list select Frequency independent.
      1. In the Relative permeability field, enter the value for μr.
      2. In the Magnetic loss tangent field, enter the value for tanδμ.
    • To create a dielectric with frequency-dependent-magnetic-properties, from the Definition method drop-down list select Frequency list (linear interpolation).
      • To enter each frequency points manually, enter the magnetic properties for each frequency point.
      • To import the frequency points from a file, click Import points.
        1. In the File name field, browse for the file you want to import.
        2. [Optional] In the Scale by field, enter a value to scale the points.

          For example, if you import a value of “2”, scale it by “10e9” to change the value to 2 GHz.

        3. Under Delimiter, click the delimiter type you use in your file.
        4. Click OK to close the Import Points dialog.